欢迎登录材料期刊网

材料期刊网

高级检索

使用流变仪在不同磁感应强度(0~0.86 T)、不同剪切速率(100~1000 s-1)下测得羰基铁粉磁流变液的剪切应力和表观黏度,分析了其剪切性能,并通过拟合得到了剪切应力和磁感应强度的定量关系.结果表明:在相同的磁感应强度下,随着剪切速率的增加,该磁流变液的剪切应力缓慢增大,表观黏度成指数下降;该磁流变液的黏度变化符合 Herschel-Bulkley 模型,磁感应强度越大,其剪切稀化效应越明显;当磁感应强度分别在0~0.23 T,0.45~0.65 T 范围内时,剪切应力和磁感应强度之间均存在指数关系,指数值分别为1.50,0.57,当磁感应强度在0.23~0.45 T 范围内时,剪切应力随磁感应强度的增加呈线性增大.

The shear stresses and apparent viscosities of the magnetorheological fluid (MRF)of carbonyl iron powder were measured by the rheometer under different magnetic flux densities (0-0.86 T)and different shear rates (100-1 000 s-1 ).The shear performance of the MRF was analyzed and the quantitative relations between shear stress and magnetic flux density were fitted.The results show that the shear stress of the MRF increased slowly but the apparent viscosity decreased exponentially with the increase of the shear rate under the same magnetic flux density.The viscosity change of the MRF coincided well with the Herschel-Bulkley model,meaning that the larger the magnetic flux density,the stronger the shear thinning effect of the MRF.When the magnetic flux densities were in the range of 0-0.23 T and 0.45-0.65 T,the shear stress and magnetic flux density showed an exponential relationship and the index value was 1.50 and 0.57 respectively.While in the range of 0.23-0.45 T,the shear stress increased linearly with the increase of magnetic flux density.

参考文献

[1] Chu-wen Guo;Fei Chen;Qing-rui Meng;Zi-xin Dong.Yield shear stress model of magnetorheological fluids based on exponential distribution[J].Journal of Magnetism and Magnetic Materials,2014:174-177.
[2] Eshaghi, Mehdi;Sedaghati, Ramin;Rakheja, Subhash.The effect of magneto-rheological fluid on vibration suppression capability of adaptive sandwich plates: Experimental and finite element analysis[J].Journal of Intelligent Material Systems and Structures,201514(14):1920-1935.
[3] 肖林京;公绪波;朱绪力;赤玉荣.磁流变液的制备及其剪切屈服应力研究[J].山东科技大学学报(自然科学版),2016(2):101-104.
[4] 陈丙三;江吉彬;黄宜坚;詹友基.基于分数阶微积分的磁流变液粘弹性模拟[J].机械工程材料,2012(07):63-66,71.
[5] 李敬民;晁月盛;周丹晨;李昌安.利用氧化铁皮制备还原铁粉磁流变液[J].机械工程材料,2010(10):46-49.
[6] 姚金光;晏华.稳定型硅油基磁流变液的制备及性能[J].机械工程材料,2010(11):65-67.
[7] Pilkee Kim;Jeong-In Lee;Jongwon Seok.Analysis of a viscoplastic flow with field-dependent yield stress and wall slip boundary conditions for a magnetorheological (MR) fluid[J].Journal of Non-Newtonian Fluid Mechanics,2014:72-86.
[8] 易成建 .磁流变液:制备、性能测试与本构模型[D].重庆大学,2011.
[9] 赵春伟 .基于微结构的磁流变液力学性能研究[D].重庆大学,2014.
[10] Alan Sternberg;Rene Zemp;Juan Carlos de la Llera.Multiphysics behavior of a magneto-rheological damper and experimental validation[J].Engineering structures,2014Jun.15(Jun.15):194-205.
[11] 郭朝阳 .磁流变液法向力及减振器研究[D].中国科学技术大学,2013.
[12] 祝长春 .磁流变液剪切应力的理论研究[D].武汉理工大学,2004.
[13] 朱绪力;孟永钢;田煜.磁流变弹性体中颗粒磁场力的简化分析模型[J].功能材料,2010(10):1712-1715.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%