针对煤液化工业管道系统中弯管部位的冲蚀磨损问题,通过二次开发将磨损模型嵌入到FLUENT中模拟计算磨损率大小及磨损位置,将计算结果与试验数据相对比以验证模型的正确性,再将磨损模型应用到煤液化管道的冲蚀磨损预测研究中.结果表明:煤粉直径小于80 μm时,磨损率随着粒径增大明显降低;最大磨损率与冲击速度成指数增长;最大磨损率随着管道弯曲角度增大而降低;弯径比为3时磨损率较小且磨损分布均匀.
参考文献
| [1] | 李大尚.煤制油工艺技术分析与评价[J].煤化工,2003(01):17-23. |
| [2] | 边钢月;边思颖;张福琴.煤转化对炼油化工行业竞争力浅析[J].化学工业,2008(10):9-11. |
| [3] | 郑友取;张新育.90°方形弯管内颗粒冲蚀磨损研究[J].热力发电,2007(4):34-37,43. |
| [4] | 程嘉瑞;杨向同;李臻;窦益华;仝少凯.API油管接箍液固两相流体冲蚀数值模拟[J].腐蚀与防护,2013(12):1067-1071. |
| [5] | H. M. Badr;M. A. Habib;R. Ben-Mansour;S. A. M. Said.Numerical investigation of erosion threshold velocity in a pipe with sudden contraction[J].Computers & Fluids,20056(6):721-742. |
| [6] | Y. Zhang;E. P. Reuterfors;B. S. McLaury;S. A. Shirazi;E. F. Rybicki.Comparison of computed and measured particle velocities and erosion in water and air flows[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,20071/6(1/6):330-338. |
| [7] | Y. I. Oka;K. Okamura;T. Yoshida.Practical estimation of erosion damage caused by solid particle impact - Part 1: Effects of impact parameters on a predictive equation[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,20051(1):95-101. |
| [8] | Jianrong Wang;Siamack A. Shirazi.A CFD Based Correlation for Erosion Factor for Long-Radius Elbows and Bends[J].Journal of Energy Resources Technology,20031(1):26-34. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%