为提高铝合金型材绕弯成形后弯曲件的尺寸精度,运用仿真分析的方法研究了在绕弯成形过程中截面几何特征对竖直壁型材成形翘曲的影响.改变具有竖直壁结构型材的截面几何特征,得到不同型材的成形结果并进行对比分析.结果表明:增加竖直壁型材外侧横向特征的对称性有助于减小成形翘曲变形;增加内侧特征能够显著减小翘曲.该研究结果可以指导型材截面设计,减少成形的难度.
To enhance the dimension precision of bending parts, the influence of cross section geometric features on the warp of vertical wall profiles in bending process was studied by theoretical analysis. Forming results were obtained and compared with each other after vertical wall profiles of different cross section geometric features were analysed . The results show that increasing the symmetry of horizontal features outside of vertical wall profiles can be helpful to reducing warping deformation, and increasing features inside can reduce warp effectively. According to the results, cross section geometric features can be guided and the complexity of bending process can be decreased.
参考文献
| [1] | Frank Vollertsen;Axel Sprenger;Jurgen Kraus;Horst Arnet.Extrusion, channel, and profile bending: a review[J].Journal of Materials Processing Technology,19991/3(1/3):1-27. |
| [2] | 金淼;周贤宾;李晓星;白笛.大尺寸封闭截面铝型材拉弯工艺研究[J].塑性工程学报,2003(6):46-49. |
| [3] | Noah Utsumi;Syuji Sakaki.Countermeasures against undesirable phenomena in the draw-bending process for extruded square tubes[J].Journal of Materials Processing Technology,20022(2):264-269. |
| [4] | A. El Megharbel;G. A. El Nasser;Aly El Domiaty.Bending of tube and section made of strain-hardening materials[J].Journal of Materials Processing Technology,20081/3(1/3):372-380. |
| [5] | 刘郁丽;卢彩红;赵刚要;杨合.间隙对薄壁矩形管绕弯成形截面畸变影响的研究[J].中国机械工程,2008(16):1972-1975. |
| [6] | 杨合;孙志超;詹梅;郭良刚;刘郁丽;李宏伟;李恒;吴跃江.局部加载控制不均匀变形与精确塑性成形研究进展[J].塑性工程学报,2008(2):6-14. |
| [7] | G. Y. Zhao, Y. L. Liu;C. S. Dong;H. Yang;X. G. Fan.Analysis of wrinkling limit of rotary-draw bending process for thin-walled rectangular tube[J].Journal of Materials Processing Technology,20109(9):1224-1231. |
| [8] | 刁可山;周贤宾;金朝海;李晓星.复杂截面型材力控制拉弯成形数值模拟分析[J].材料科学与工艺,2004(4):413-416. |
| [9] | 刘志文;董菲菲;李落星;姚再起.汽车防护杠用大口径薄壁钢管绕弯成形工艺参数优化[J].汽车工程,2015(7):853-860. |
| [10] | 贾美慧;唐承统;王文刚.工艺参数对管材绕弯成形质量的显著性影响分析[J].机床与液压,2012(21):29-33. |
| [11] | 王修坤;李勇;曾志新;陈创新.纯滚动式绕弯工艺分析与实验研究[J].机械设计与制造,2012(5):141-143. |
| [12] | 杨玉英;董昀;赵立红.帽形型材绕弯件的曲率一致性[J].材料科学与工艺,2004(1):91-94. |
| [13] | 唐建阳;万敏.铝合金型材张力绕弯成形几何缺陷数值模拟分析[J].锻压技术,2005(1):29-32. |
| [14] | 刁可山;周贤宾;金朝海.铝合金型材拉弯成形研究进展[J].塑性工程学报,2003(6):38-42. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%