环保型铝合金阳极氧化表面处理研究进展

材料导报, 2015, 29(7): 107-112. doi: 10.11896/j.issn.1005-023X.2015.07.018

环保型铝合金阳极氧化表面处理研究进展

陈小丽 ^1, , 麻彦龙 ^2, , 黄伟九 ^3, , 张小彬 ^4, , 孟晓敏 ^5, , 易雅楠 ^6,

1.重庆理工大学材料科学与工程学院,重庆,400054

2.重庆理工大学材料科学与工程学院,重庆,400054

3.重庆理工大学材料科学与工程学院,重庆,400054

4.重庆理工大学材料科学与工程学院,重庆,400054

5.重庆理工大学材料科学与工程学院,重庆,400054

6.重庆理工大学材料科学与工程学院,重庆,400054

基金项目: 国家自然科学基金(51301214,51441002) 重庆市基础与前沿研究计划项目(cstc2013jcyjA50017) 留学回国人员科研启动基金(第47批)

关键词：铝合金 , 阳极氧化 , 表面处理 , 环境保护

Researches on Environmentally Friendly Anodizing Surface Treatments of Aluminum Alloys

Keywords： aluminum alloy , anodizing , surface treatment , environmental protection

铝及其合金具有密度小、成形加工性能好、可回收利用和节能环保等优点,是飞机、汽车等现代交通工具制造的关键材料.但铝合金易发生局部腐蚀而失效,故工业应用中需对其进行阳极氧化以提高抗腐蚀能力.综述了近年来新型铝合金阳极氧化领域的研究现状,并重点关注了绿色环保型铝合金阳极氧化表面处理技术的研究进展,以期为新型航空铝合金及汽车铝合金表面处理技术的发展提供参考.

参考文献

[1]	孙洁琼,张宝柱.先进铝锂合金的特点及其在民用飞机上的应用[J].航空工程进展,2013(02):158-163.
[2]	新型铝锂合金的微观组织及其在局部腐蚀中的作用[J].材料导报,2014(13):82-85.
[3]	H. Karbasian;A. E. Tekkaya .A review on hot stamping[J].Journal of Materials Processing Technology,2010(15):2103-2118.
[4]	Caballero F G;Allain S;Cornide J et al.Design of cold rolled and continuous annealed carbide-free bainitic steels for automotive application[J].Materials and Design,2013,49:667.
[5]	詹志强.铝合金汽车车身板应用现状及需求前景[J].有色金属加工,2013(6):1.
[6]	Antunes R A;Oliveira M C L .Materials selection for hot stamped automotive body parts:An application of the Ashby approach based on the strain hardening exponent and stacking fault energy of materials[J].Materials and Design,2014,63:247.
[7]	铝锂合金2090-T83的合金化研究[J].热加工工艺,2014(10):57-59,63.
[8]	李运春 .含钪Al-Cu-Li-Zr合金腐蚀行为的研究[D].中南大学,2008.
[9]	Arenas MA;de Damborenea JJ .Surface characterisation of cerium layers on galvanised steel[J].Surface & Coatings Technology,2004(2/3):320-325.
[10]	W.B. Liu;S.C. Zhang;N. Li;J.W. Zheng;Y.L Xing .Influence of phase constituent and proportion in initial Al-Cu alloys on formation of monolithic nanoporous copper through chemical dealloying in an alkaline solution[J].Corrosion Science: The Journal on Environmental Degradation of Materials and its Control,2011(2):809-814.
[11]	周鼎华.铝合金表面处理技术新进展[J].热处理技术与装备,2006(04):10-15.
[12]	Y. Ma;X. Zhou;G. E. Thompson .Microstructural Modification Arising from Alkaline Etching and Its Effect on Anodizing Behavior of Al-Li-Cu Alloy[J].Journal of the Electrochemical Society,2013(3):C111-C118.
[13]	Ma Y;Zhou X;Thompson G E et al.Surface texture formed on AA2099 Al-Li-Cu alloy during alkaline etching[J].Corrosion Science,2013,66:292.
[14]	Zhu H;Couper M J;Dahle A K .Etching effects and the formation of streaking defects on Al extrusions[J].Aluminium Int Today,2011,5(6):31.
[15]	Hanliang Zhu;Xinquan Zhang;Malcolm J. Couper .The Formation of Streak Defects on Anodized Aluminum Extrusions[J].JOM,2010(5):46-51.
[16]	HANLIANG ZHU;XINQUAN ZHANG;MALCOLM J. COUPER .Effect of Initial Microstructure on Surface Appearance of Anodized Aluminum Extrusions[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2009(13):3264-3275.
[17]	Y. Ma;X. Zhou;G. E. Thompson;J. O. Nilsson;M. Gustavsson;A. Crispin .Origin of streaks on anodised aluminium alloy extrusions[J].Transactions of the Institute of Metal Finishing: The International Journal for Surface Engineering and Coatings,2013(1):11-16.
[18]	Ma, Y.;Zhou, X.;Thompson, G.E.;Nilsson, J.-O.;Gustavsson, M.;Crispin, A. .Anodizing of AA6063 aluminium alloy profiles: Generation of dark appearance[J].Surface and Interface Analysis: SIA: An International Journal Devoted to the Development and Application of Techniques for the Analysis of Surfaces, Interfaces and Thin Films,2013(10):1479-1484.
[19]	吴申敏.草酸阳极氧化新工艺及其应用[J].上海航天,1996(05):61.
[20]	Hakimizad, A.;Raeissi, K.;Ashrafizadeh, F. .Characterization of aluminum anodized layers modified in sulfuric and phosphoric acid baths and their effect on conventional electrolytic coloring[J].Surface & Coatings Technology,2012(8/9):2438-2445.
[21]	陈朝轶,张鹏,刘静,高国丁.6063铝合金阳极氧化膜腐蚀行为研究[J].热加工工艺,2013(16):38-40.
[22]	刘静,张鹏.7075铝合金阳极氧化膜的腐蚀行为[J].材料保护,2013(08):56-57,69.
[23]	孔水龙,楼白杨,李培华,董朝晖.铝合金阳极氧化膜的耐蚀行为研究[J].热加工工艺,2012(10):157-158,161.
[24]	王晓燕,翟秀静,张廷安,郑双.阳极氧化铝膜的耐蚀性能及光学透射性[J].有色金属,2010(04):27-29.
[25]	周雅,周佳,江溢民.2024-T3铝合金硫酸、草酸和酒石酸常温硬质氧化工艺[J].材料保护,2012(02):45-48.
[26]	许旋,罗一帆.添加剂对铝合金阳极氧化膜形成的影响[J].应用化学,2002(04):355-358.
[27]	孟栋 .稀土对铝合金硫酸—草酸阳极氧化的影响[D].合肥工业大学,2013.
[28]	杨培霞,安茂忠,郑铁帅.硫酸/草酸混酸电解液中阳极氧化法制备多孔阳极氧化铝模板[J].无机化学学报,2005(12):1907-1911.
[29]	W. BENSALAH,M. FEKI,M. WERY,H.F. AYEDI.铝阳极氧化层的耐化学腐蚀性能[J].中国有色金属学报（英文版）,2011(07):1673-1679.
[30]	孙衍乐,宣天鹏,许少楠,张敏.硫酸铈对铝合金阳极氧化膜耐蚀性的影响[J].电镀与精饰,2011(02):37-40.
[31]	杜楠,王帅星,赵晴,邵志松.硼酸对7050铝合金硼酸-硫酸阳极氧化膜结构及耐蚀性的影响[J].中国有色金属学报（英文版）,2012(07):1655-1660.
[32]	王雨顺,周俊凤,丁毅,马立群.铝合金两种阳极氧化工艺的氧化膜性能对比[J].轻合金加工技术,2010(06):50-53.
[33]	Deng S;Xu L;Li Q Z et al.Corrosion behavior of anodic films formed on aluminium 7A04 alloy in boric/sulphuric mixed acid and in chromic acid[J].Adv Mater Res,2012,399:95.
[34]	Kock E;Beneke M;Gerlach C .Method for anodizing aluminum materials[P].US 11/021,722,2004-12-22.
[35]	Curioni M;Skeldon P;Thompson G E et al.Graded anodic film morphologies for sustainable exploitation of aluminium alloys in aerospace[J].Adv Mater Res,2008,38:48.
[36]	M. Curioni;P. Skeldon;E. Koroleva .Role of Tartaric Acid on the Anodizing and Corrosion Behavior of AA 2024 T3 Aluminum Alloy[J].Journal of the Electrochemical Society,2009(4):C147-C153.
[37]	Y. Ma;X. Zhou;G. E. Thompson .Anodic Film Formation on AA 2099-T8 Aluminum Alloy in Tartaric-Sulfuric Acid[J].Journal of the Electrochemical Society,2011(2):C17-C22.
[38]	李利.铝及铝合金阳极氧化膜的绿色封闭工艺研究进展[J].材料开发与应用,2012(01):75-83.
[39]	刘文亮.铝合金阳极氧化膜有机酸封闭技术[J].电镀与精饰,1998(02):42.
[40]	Garson P. Shulman;A.J. Bauman .Organic Acid Sealants for Anodized Aluminum—A New Method for Corrosion Protection[J].Metal finishing,1995(7):16,18-19-0.
[41]	Garson P. Shulman;A.J. Bauman .Corrosion Protection of Steel Using Organic Acid Sealed Anodized Aluminum Coatings[J].Metal finishing,1996(6):93-95.
[42]	Bautista A.;Gonzalez JA.;Lopez V. .Influence of triethanolamine additions on the sealing mechanism of anodised aluminium[J].Surface & Coatings Technology,2002(1):49-54.
[43]	赵鹏辉,左禹.硬脂酸封闭工艺参数对铝阳极氧化膜耐蚀性的影响[J].材料保护,2002(05):30-31,39.
[44]	余祖孝,郝世雄,王莹,左由兵,易伟.铝阳极氧化膜不同封孔方法的耐腐蚀性能研究[J].轻合金加工技术,2007(04):35-37.
[45]	Zuo Y.;Zhao PH.;Zhao JM. .The influences of sealing methods on corrosion behavior of anodized aluminum alloys in NaCl solutions[J].Surface & Coatings Technology,2003(2/3):237-242.
[46]	刘建华,李永星,于美,李松梅,陈高红,于海洋.三种无铬封闭方法对铝合金阳极氧化膜耐蚀性的影响[J].材料热处理学报,2011(10):129-133.
[47]	赵景茂,霍品,赵旭辉,左禹.脉冲电场下铝阳极氧化膜铈盐封闭的研究[J].腐蚀科学与防护技术,2012(04):323-326.
[48]	霍品 .脉冲电场作用下铈盐对铝阳极氧化膜的封闭作用[D].北京化工大学,2012.
[49]	王帅星,赵晴,杜楠,邵志松,舒伟发,陈庆龙.铈盐对铝合金硼酸-硫酸阳极氧化膜的封闭效应[J].中国有色金属学报,2012(04):1132-1141.
[50]	周赟,宣天鹏,张万利,汪亮.封闭工艺对铝合金阳极氧化膜耐蚀性的影响[J].电镀与精饰,2012(04):1-4.
[51]	杨珂,宋亮亮,陈永来,张绪虎,蔡超,李劲风.2195铝锂合金阳极氧化膜几种封孔方式耐蚀性比较[J].腐蚀科学与防护技术,2014(06):494-498.
[52]	时军,靳惠明,李露,成艳芳,王丹.6063铝合金多种阳极氧化封孔膜性能比较[J].化学工程与装备,2013(01):13-15.
[53]	Capelossi V R;Poelman M;Recloux I et al.Corrosion protection of clad 2024 aluminum alloy anodized in tartaricsulfuric acid bath and protected with hybrid sol-gel coating[J].Electrochimica Acta,2014,124:69.
[54]	Dinesh Balgude;Anagha Sabnis .Sol-gel derived hybrid coatings as an environment friendly surface treatment for corrosion protection of metals and their alloys[J].Journal of Sol-Gel Science and Technology,2012(1):124-134.
[55]	周琦,贺春林,才庆魁,邵忠宝,朱学松.铝合金阳极氧化膜的勃姆石溶胶封闭[J].中国有色金属学报,2007(08):1385-1390.
[56]	孙玉凤,周琦,赫先醒,才庆魁.铝合金氧化膜的铝溶胶封孔工艺研究[J].电镀与精饰,2011(07):10-12,43.
[57]	王强,孙志华,詹中伟,王志申.磷酸三乙酯对铝合金阳极氧化膜溶胶凝胶封闭性能的影响[J].航空材料学报,2014(03):48-56.

上一张下一张

计量

下载量()
访问量()

作者相关

文章评分

您的评分：
1

0%
2

0%
3

0%
4

0%
5

0%

材料期刊网

环保型铝合金阳极氧化表面处理研究进展

Researches on Environmentally Friendly Anodizing Surface Treatments of Aluminum Alloys

参考文献