欢迎登录材料期刊网

材料期刊网

高级检索

双极板是质子交换膜燃料电池(PEMFC)的重要组成部分,起收集传导电流、分隔氧化剂和燃料以及支撑电池堆等作用,占整个电池质量和成本的很大比重.目前PEMFC双极板材料主要有石墨、金属及相关复合材料.与其他双极板相比,金属双极板因具有导电导热性好、机械强度高、易加工和成本低等优点而受到重视,但其面临腐蚀及表面层钝化影响电池性能等问题.为此,国内外研究者对金属双极板的表面改性开展了广泛的研究,并取得了很大进展.

参考文献

[1] Reza Taherian .A review of composite and metallic bipolar plates in proton exchange membrane fuel cell:Materials,fabrication,and material selection[J].Journal of Power Sources,2014,265:370.
[2] Allen Hermann;Tapas Chaudhuri;Priscila Spagnol .Bipolar plates for PEM fuel cells: A review[J].International journal of hydrogen energy,2005(12):1297-1302.
[3] Sie Chin Tjong .Polymer nanocomposite bipolar plates reinforced with carbon nanotubes and graphite nanosheets[J].Energy & environmental science: EES,2011(3):605-626.
[4] Yun Wang;Ken S. Chen;Jeffrey Mishler;Sung Chan Cho;Xavier Cordobes Adroher .A review of polymer electrolyte membrane fuel cells: Technology, applications,and needs on fundamental research[J].Applied energy,2011(4):981-1007.
[5] Steele B C;Heinzel A .Materials for fuel-cell technologies[J].NATURE,2001,414(6861):345.
[6] Talal Ous;C. Arcoumanis .The formation of water droplets in an air-breathing PEMFC[J].International journal of hydrogen energy,2009(8):3221-3233.
[7] Bjorn Winther-Jensen;Orawan Winther-Jensen;Maria Forsyth;Douglas R. MacFartane .High Rates of Oxygen Reduction over a Vapor Phase-Polymerized PEDOT Electrode[J].Science,2008(5889):671-674.
[8] H. Wang;J. A. Turner .Reviewing Metallic PEMFC Bipolar Plates[J].Fuel cells,2010(4):510-519.
[9] Rujin Tian;Juncai Sun .Corrosion resistance and interfacial contact resistance of TiN coated 316L bipolar plates for proton exchange membrane fuel cell[J].International journal of hydrogen energy,2011(11):6788-6794.
[10] Clulow J G;Zappitelli F E;Carlstrom C M.Fuel cell technology:Opportunities and challenges[A].New Orleans,2002:417.
[11] N. de las Heras;E. P. L. Roberts;R. Langton;D. R. Hodgson .A review of metal separator plate materials suitable for automotive PEM fuel cells[J].Energy & environmental science: EES,2009(2):206-214.
[12] H. Tawfik;Y. Hung;D. Mahajan .Metal bipolar plates for PEM fuel cell-A review[J].Journal of Power Sources,2007(2):755-767.
[13] Mehta V;Cooper J S .Review and analysis of PEM fuel cell design and manufacturing[J].Journal of Power Sources,2003,114(01):32.
[14] Bu Gi Kim;Jun Woo him;Dai Gil lee .A single-type aluminum/composite hybrid bipolar plate with surface modification for high efficiency PEMFC[J].International journal of hydrogen energy,2011(4):3087-3095.
[15] Wang Y;Northwood D O .An investigation into the effects of a nano-thick gold interlayer on polypyrrole coatings on 316L stainless steel for the bipolar plates of PEM fuel cells[J].Journal of Power Sources,2008,175:40.
[16] Joong Hee Lee;Yun Ki Jang;Chang Eui Hong;Nam Hoon Kim;Peng Li;Hong Ki Lee .Effect of carbon fillers on properties of polymer composite bipolar plates of fuel cells[J].Journal of Power Sources,2009(2):939-943.
[17] The preparation technique optimization of epoxy/compressed expanded graphite composite bipolar plates for proton exchange membrane fuel cells[J].Journal of Power Sources,2010(16):p.5312.
[18] Corrosion protection of type 304 stainless steel bipolar plates of proton-exchange membrane fuel cells by doped polyaniline coating[J].Journal of Power Sources,2010(7):1914.
[19] 潘红涛,徐群杰,云虹,邓先钦.质子交换膜燃料电池用不锈钢双极板的腐蚀与表面改性研究进展[J].腐蚀与防护,2011(08):585-590.
[20] Mirzaee Sisan M;Abdolahi Sereshki M;Khorsand H et al.Carbon coating for corrosion protection of SS-316L and AA-6061 as bipolar plates of PEM fuel cells[J].Journal of Alloys and Compounds,2014,613:288.
[21] Tomokazu Fukutsuka;Takayuki Yamaguchi;Shin-Ichi Miyano;Yoshiaki Matsuo;Yosohiro Sugie;Zempachi Ogumi .Carbon-coated stainless steel as PEFC bipolar plate material[J].Journal of Power Sources,2007(1):199-205.
[22] Chih-Yeh Chung;Shi-Kun Chen;Po-Jen Chiu;Ming-Hsin Chang;Tien-Tsai Hung;Tse-Hao Ko .Carbon film-coated 304 stainless steel as PEMFC bipolar plate[J].Journal of Power Sources,2008(1):276-281.
[23] Performance of a proton exchange membrane fuel cell stack using conductive amorphous carbon-coated 304 stainless steel bipolar plates[J].Journal of Power Sources,2010(20):P.7061.
[24] Yang-Bok Lee;Choong-Hyun Lee;Kyung-Min Kim;Dae-Soon Lim .Preparation and properties on the graphite/polypropylene composite bipolar plates with a 304 stainless steel by compression molding for PEM fuel cell[J].International journal of hydrogen energy,2011(13):7621-7627.
[25] Shine Joseph;J.C. McClure;R. Chianelli;P. Pich;P.J. Sebastian .Conducting polymer-coated stainless steel bipolar plates for proton exchange membrane fuel cells (PEMFC)[J].International journal of hydrogen energy,2005(12):1339-1344.
[26] Shine Joseph;J.C. McClure;P.J. Sebastian;J. Moreira;Edgar Valenzuela .Polyaniline and polypyrrole coatings on aluminum for PEM fuel cell bipolar plates[J].Journal of Power Sources,2008(1):161-166.
[27] 江自然,肖海波,阳东方,刘宇尘,姚锐,郑峰.质子交换膜燃料电池双极板用不锈钢的聚苯胺涂层改性[J].粉末冶金材料科学与工程,2014(02):285-292.
[28] Hentall P L;Lakeman J B;Mepsted G O et al.New materials for polymer electrolyte membrane fuel cell current collectors[J].Journal of Power Sources,1999,80(1-2):23.
[29] Wind J;Spah R;Kaiser W et al.Metallic bipolar plates for PEM fuel cells[J].Journal of Power Sources,2002,105(02):256.
[30] Ing-Bang Huang .Evaluation of silver-coated stainless steel bipolar plates for fuel cell applications[J].Journal of Power Sources,2011(18):7649-7653.
[31] 曹彩红,梁成浩,黄乃宝.[emim]OTf离子液体中镀铌不锈钢双极板在PEMFC环境中的电化学行为[J].稀有金属材料与工程,2013(03):569-573.
[32] 陈益兵,赵芳霞,张振忠,姚振虎,孙佰文.质子交换膜燃料电池不锈钢双极板无氰脉冲镀银[J].材料保护,2011(11):58-60.
[33] Jun-Ho Kim;Dong-Won Jung;SunKwang Kim et al.Durability of a niobium thinfilm for bipolar plates in PEMFC[J].VACUUM,2012,86:1789.
[34] Sun H;Cooke K;Eitzingeret G et al.Development of PVD coatings for PEMFC metallic bipolar plates[J].THIN SOLID FILMS,2013,528:199.
[35] Nguyen Dang Nam;Deok Su Jo;Jung Gu Kim;Dae Ho Yoon .Corrosion protection of CrN/TiN multi-coating for bipolar plate of polymer electrolyte membrane fuel cell[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,2011(20):6787-6791.
[36] Ki-Hyoung Lee;Seok-Hyun Lee;Jong-Hee Kim;Yun-Yong Lee;Young-Hwan Kim;Min-Chul Kim;Dang-Moon Wee .Effects Of Thermal Oxi-nitridation On The Corrosion Resistance And Electrical Conductivity Of 446m Stainless Steel For Pemfc Bipolar Plates[J].International journal of hydrogen energy,2009(3):1515-1521.
[37] Pulauskas I E;Brady M P et al.Corrosion behavior of CrN,Cr2N and π phase surfaces on nitrified Ni-50Cr for proton exchange membrane fuel cell bipolar plates[J].Corrosion Science,2006,48(10):3157.
[38] Brady M P;Wang H;Turner J A et al.Pre-oxidized and nitrified stainless steel alloy foil for proton exchange membrane fuel cell bipolar plates.Part 1:Corrosion,interfacial contact resistance,and surface structure[J].Journal of Power Sources,2010,195(17):5610.
[39] Toops T J;Brady M P;Tortorelli P F et al.Pre-oxidized and nitrified stainless steel alloy foil for proton exchange mmbrane fuel cell bipolar plates.Part 2:Single-cell fuel cell evaluation of stamped plates[J].Journal of Power Sources,2010,195(17):5619.
[40] 付广艳,戴世鑫,牛云松,于志明.燃料电池用钛双极板表面Cr/TiN/Ti复合涂层的导电性及耐蚀性能[J].腐蚀科学与防护技术,2011(04):335-337.
[41] Wang H;Turner J A;Li X et al.SnO2:F coated austenite stainless steels for PEM fuel cell bipolar plates[J].Journal of Power Sources,2007,171(02):567.
[42] Kwang Min Kim;Jong Hee Kim;Yun Yong Lee;Kyoo Young Kim .Electrodeposition of ruthenium oxide on ferritic stainless steel bipolar plate for polymer electrolyte membrane fuel cells[J].International journal of hydrogen energy,2012(2):1653-1660.
[43] Mohammadi N;Yari M;Allahkaram S R .Characterization of PbO2 coating electrodeposited onto stainless steel 316L substrate for using as PEMFC's bipolar plates[J].Surface and Coatings Technology,2013,236:341.
[44] Amani E. Fetohi;R.M. Abdel Hameed;K.M. El-Khatib;Eglal R. Souaya .Study of different aluminum alloy substrates coated with Ni-Co-P as metallic bipolar plates for PEM fuel cell applications[J].International journal of hydrogen energy,2012(14):10807-10817.
[45] 闫斌,陈宏霞,陈嘉宾,马学虎.SUS304不锈钢耐腐蚀性硅氧烷复合膜的研究[J].石油化工腐蚀与防护,2008(05):1-4.
[46] 姚振虎,张振忠,赵芳霞,孙佰文.质子交换膜燃料电池双极板化学镀Ni-Cu-P表面改性[J].腐蚀与防护,2010(06):431-433.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%