欢迎登录材料期刊网

材料期刊网

中国科学院金属研究所 科学出版社
高级检索
  1. 首页
  2. 期刊
  3. 航空材料学报
  4. Ti-Al系金属间化合物基叠层结构材料的制备技术与组织性能特征

航空材料学报, 2014, 34(4): 98-111. doi: 10.11868/j.issn.1005-5053.2014.4.010

Ti-Al系金属间化合物基叠层结构材料的制备技术与组织性能特征

孙彦波 1, , 马凤梅 2, , 肖文龙 3, , 马朝利 4,

1.北京航空航天大学材料科学与工程学院空天先进材料与服役教育部重点实验室,北京,100191

2.北京航空航天大学材料科学与工程学院空天先进材料与服役教育部重点实验室,北京,100191

3.北京航空航天大学材料科学与工程学院空天先进材料与服役教育部重点实验室,北京,100191

4.北京航空航天大学材料科学与工程学院空天先进材料与服役教育部重点实验室,北京,100191

关键词： 钛合金 , 钛铝金属间化合物 , 叠层结构 , 复合材料

Preparation and Performance Characteristics for Multilayered Ti-Al Intermetallics Alloys

Keywords： Ti alloys , Ti-Al intermetallics , multilayered structure , composite

Ti-Al金属间化合物相与韧性Ti交替的叠层结构材料既可以保留Ti-Al金属间化合物的高温强度,又可拥有高的室温韧性,受到研究者的广泛关注.综述Ti增韧Ti-Al系金属间化合物基叠层复合材料两种制备方法,即箔箔冶金法和气相沉积法的物理冶金学过程和致密化工艺,介绍各种技术条件下叠层材料组织结构和性能特点,并对各种技术的优缺点进行阐述.最后,对该种复合材料的未来应用领域和发展趋势进行展望,通过工艺调整来制备出具有更加合适的叠层结构和优异性能的材料,依旧是近几年的研究重点.

参考文献

[1] 李成功,傅恒志,于翘,等.航空航天材料[M].国防工业出版社,2002.1:120.,2002.
[2] HARVIS D J,VOSS D .IMPRESS integrated project-an overview paper[J].Materials Science and Engineering:A,2005,413(0):583-591.,2005.
[3] LIPSITT H A,SHECHTMAN D,SCHAFRIK R E .The deformation and fracture of TiAl at elevated temperatures[J].MTA,1975,6(11):1991-1996.,1975.
[4] LIPSITT H A,SHECHTMAN D,SCHAFRIK R E .The deformation and fracture of Ti3Al at elevated temperatures[J].MTA,1980,11(8):1369-1375.,1980.
[5] WARD-CLOSE C M,MINOR R,DOORBAR P J .Intermetallic-matrix composites-a review[J].Intermetallics,1996,4(3):217-229.,1996.
[6] YAMAGUCHI M,INUI H,ITO K .High-temperature structural intermetallics[J].Acta Materialia,2000,48(1):307-322.,2000.
[7] WU X H .Review of alloy and process development of TiAl alloys[J].Intermetallics,2006,14:1114-1122.,2006.
[8] LIU C T,STIEGLER J O .Ductile ordered intermetallic alloys[J].Science,1984,226(4675):636-642.,1984.
[9] KIM Y W .Intermetallic alloys based on gamma titanium aluminide[J].JOM,1989,41(7):24-30.,1989.
[10] FROES F H,SURYANARAYANA C,ELIEZER D .Synthesis,properties and applications of titanium aluminides[J].Journal of Materials Science,1992,27(19):5113-5140.,1992.
[11] VOGELESANG L B .Development of a new hybrid material (ARALL) for aircraft structures[J].Industrial & Engineering Chemistry Product Research and Development,1983,22(3):492-496.,1983.
[12] CLEGG W J,KENDALLK,ALFORD N M,et al .A simple way to make tough ceramics[J].Nature,1990,347(6292):455-457.,1990.
[13] JACKSON A P,VINCENT J F V,BRIGGS D,et al .Application of surface analytical techniques to the study of fracture surfaces of mother-of-pearl[J].Journal of Materials Science Letters,1986,5(10):975-978.,1986.
[14] ROWE R G,SKELLY D W,LARSEN M,et al .Microlaminated high temperature intermetallic composites[J].Scripta Metallurgica et Materialia,1994,31(11):1487-1492.,1994.
[15] 向春霆,范镜泓 .自然复合材料的强韧化机理和仿生复合材料的研究[J].力学进展,1994,24(2):220-232.(XIANG C T,FAN J H.On the strengthening and toughness mechanism of natural composites and research of biomimetic composites[J].Advances in Mechanics,1994,24(2):220-232.),1994.
[16] WU H F,WU L L .MIL-HDBK-5 design allowables for fibre/metal laminates:ARALL 2 and ARALL 3[J].Journal of Materials Science Letters,1994,13(8):582-585.,1994.
[17] MOUSSAVI-TORSHIZI S E,DARIUSHI S,SADOGJO M,et al .A study on tensile properties of a novel fiber/metal laminates[J].Materials Science and Engineering:A,2010,527:4920-4925.,2010.
[18] WAS G S,FOECKE T .Deformation and fracture in microlaminates[J].Thin Solid Films,1996,286:1-31.,1996.
[19] SURESH S .Modeling and design of multi-layered and graded materials[J].Progress in Materials Science,1997,42:243-251.,1997.
[20] HEATHCOTE J,ODETTE G R,LUCAS G E,et al .On the micromechanics of low temperature strength and toughness of intermetallic/metallic microlaminate composites[J].Acta Materialia,1996,44(11):4289-4299.,1996.
[21] RAWERS J,PEERY K .Crack initiation in laminated metal-intermetallic composites[J].Journal of Materials Science,1996,31(13):3501-3506.,1996.
[22] HARACH D,VECCHIO K .Microstructure evolution in metal-intermetallic laminate (MIL) composites synthesized by reactive foil sintering in air[J].Metallurgical and Materials Transactions:A,2001,32(6):1493-1505.,2001.
[23] BLOYER D R,VENKATESWARA RAO K T,RITCHIE R O .Resistance-curve toughening in ductile/brittle layered structures:behavior in Nb/Nb3 Al laminates[J].Materials Science and Engineering:A,1996,216:80-90.,1996.
[24] BLOYER D R,VENKATESWARA RAO K T,RITCHIE R O .Laminated Nb/Nb3Al composites:effect of layer thickness on fatigue and fracture behavior[J].Materials Science and Engineering:A,1997,239
[25] VECCHIO K .Synthetic multifunctional metallic-intermetallic laminate composites[J].JOM Journal of the Minerals,2005,57(3):25-31.,2005.
[26] RAWERS J C,MAUPIN H E .Metal-intermetallic composites formed by reaction-sintering metal foils[J].Journal of Materials Science Letters,1993,12(9):637-639.,1993.
[27] OH J k,LEE W,PYO S,et al .Microstructural analysis of multilayered titanium aluminide sheets fabricated by hot rolling and heat treatment[J].Metallurgical and Materials Transactions:A,2002,33(12):3649-3659.,2002.
[28] LUO J G,ACOFF V L .Using cold roll bonding and annealing to process Ti/Al multi-layered composites from elemental foils[J].Materials Science and Engineering:A,2004,379:164-172.,2004.
[29] SUN Y B,ZHAO Y Q,ZHANG D,et al.Multilayered Ti-Al intermetallic sheets fabricated by cold rolling and annealing of titanium and aluminum foils[J].Transactions of Nonferrous Metals Society of China,2011 (21):1722-1727.,2011.
[30] RAWERS J C,HANSEN J S,ALMAN D E,et al .Formation of sheet metal-intermetallic composites by self-propagating high-temperature reactions[J].Journal of Materials Science Letters,1994,13(18):1357-1360.,1994.
[31] ZHANG J L .Synthesis of gamma-TiAl foils and sheets by innovative reactive diffusion methods from elemental Ti and Al[J].Intermetallics,2010,18(12):2292-2300.,2010.
[32] YI H C,PETRIC A,MOORE J J .Effect of heating rate on the combustion synthesis of Ti-Al intermetallic compounds[J].Journal of Materials Science,1992,27(24):6797-6806.,1992.
[33] WANG G X,DAHMS M,LEITNER G,et al .Titanium aluminides from cold-extruded elemental powders with Alcontents of 25-75 at% Al[J].Journal of Materials Science,1994,29(7):1847-1853.,1994.
[34] JAKOB A,SPEIDEL M O .Microstructure and tensile properties of TiAl compounds formed by reactive foil metallurgy[J].Materials Science and Engineering:A,1994,189:129-136.,1994.
[35] PENG L M,WANG J H,LI H,et al .Synthesis and microstructural characterization of Ti-Al3Ti metal-intermetallic laminate (MIL) composites[J].Scripta Materialia,2005,52(3):243-248.,2005.
[36] VAN LOO F J J,RIECK G D .Diffusion in the titanium-aluminium system:Ⅰ:interdiffusion between solid Al and Ti or Ti-Al alloys[J].Acta Metallurgica,1973,21(1):61-71.,1973.
[37] ROHATGI A,HARACH D J,VECCHIO K S,et al .Resistance-curve and fracture behavior of Ti-Al3 Ti metallic-intermetallic laminate (MIL) composites[J].Acta Materialia,2003,51(10):2933-2957.,2003.
[38] LI T Z,GRIGNON F,BENSON D J,et al .Modeling the elastic properties and damage evolution in Ti-Al3Ti metalintermetallic laminate (MIL) composites[J].Materials Science and Engineering:A,2004,374:10-26.,2004.
[39] ADHARAPURAPU R,VECCHIO K,JIANG F C,et al .Effects of ductile laminate thickness,volume fraction,and orientation on fatigue-crack propagation in Ti-Al3Ti metalintermetallic laminate composites[J].Metallurgical and Materials Transactions:A,2005,36(6):1595-1608.,2005.
[40] ADHARAPURAPU R,VECCHIO K,JIANG F C,et al .Fracture of Ti-Al3Ti metal-intermetallic laminate composites:effects of lamination on resistance-curve behavior[J].Metallurgical and Materials Transactions:A,2005,36(11):3217-3236.,2005.
[41] LI T Z,JIANG F C,OLEVSKY E A,et al .Damage evolution in Ti6Al4V-Al3Ti metal-intermetallic laminate composites[J].Materials Science and Engineering:A,2007,443:1-15.,2007.
[42] PRICE R D,JIANG F C,KULIN R M,et al .Effects of ductile phase volume fraction on the mechanical properties of Ti-Al3Ti metal-intermetallic laminate (MIL) composites[J].Materials Science and Engineering:A,2011,528:3134-3146.,2011.
[43] CUI X P,FAN G H,GENG L,et al .Growth kinetics of TiAl3 layer in multi-laminated Ti-(TiB2/Al) composite sheets during annealing treatment[J].Materials Science and Engineering:A,2012,539(0):337-343.,2012.
[44] FUKUTOMI H,NAKAMURA M,SUZUKI T,et al .Void formation by the reactive diffusion of titanium and aluminum foils[J].Materials Transactions Jim,2000,41(9):1244-1246.,2000.
[45] ALMAN D E,HAWK J A,RAWERS J C .Processing intermetallic composites by self-propagating,high-temperature synthesis[J].JOM:The Journal of the Minerals,1994,46(3):31-35.,1994.
[46] CHE H Q,FAN Q C .Microstructural evolution during the ignition/quenching of pre-heated Ti/3Al powders[J].Journal of Alloys and Compounds,2009,475:184-190.,2009.
[47] XU L,CUI Y Y,HAO Y L,et al .Growth of intermetallic layer in multi-laminated Ti/Al diffusion couples[J].Materials Science and Engineering:A,2006,435
[48] 吴引江,兰涛.漫渗燃烧合成TiAl金属间化合物的物化过程探讨[J].稀有金属材料与工程,1996(02):17-20.
[49] OH J K,PYO S G,LEE S H,et al .Fabrication of multilayered titanium aluminide sheets by self-propagating hightemperature synthesis reaction using hot rolling and heat treatment[J].Journal of Materials Science,2003,38(17):3647-3651.,2003.
[50] JIANG Y,DENG C P,HE Y H,et al .Reactive synthesis of microporous titanium-aluminide membranes[J].Materials Letters,2009,63(1):22-24.,2009.
[51] ALMAN D E,DOGN C P,HAWK J A,etal .Processing,structure and properties of metal-intermetallic layered composites[J].Materials Science and Engineering:A,1995,192(2):624-632.,1995.
[52] ALMAN D,RAWERS J,HAWK J .Microstructural and failure characteristics of metal-intermetallic layered sheet composites[J].Metallurgical and Materials Transactions:A,1995,26(3):589-599.,1995.
[53] PENG L M,LI H,WANG J H .Processing and mechanical behavior of laminated titanium-titanium tri-aluminide (Ti-Al3Ti) composites[J].Materials Science and Engineering:A,2005,406:309-318.,2005.
[54] RAWERS J C,ALMAN D E .Fracture characteristics of metal/intermetallic laminar composites produced by reaction sintering and hot pressing[J].Composites Science and Technology,1995,54(4):379-384.,1995.
[55] YANG D K,CIZEK P,HODGSON P,et al .Ultrafine equiaxed-grain Ti/Al composite produced by accumulative roll bonding[J].Scripta Materialia,2010,62(5):321-324.,2010.
[56] CUI X P,PAN G H,GENG L,et al .Fabrication of fully dense TiAl-based composite sheets with a novel microlaminated microstructure[J].Scripta Materialia,2012,6(5):276-279.,2012.
[57] J.C.Pang,G.H.Fan,X.P.Cui,A.B.Li,L.Geng,Z.Z.Zheng,Q.W.Wang.Microstructure Evolution of in situ (Ti3AlC + Ti5Si3)/Ti3Al Composite Sheet with a Novel Quasi-continuous Chain Reinforcement Distribution Architecture Prepared by Using Roll Bonding and Reaction Annealing[J].材料科学技术（英文版）,2013(12):1191-1196.
[58] PANG J C,FAN G H,CUI X P,et al .Mechanical properties of Ti-(SiCp/Al) laminated composite with nano-sized TiAl3interfacial layer synthesized by roll bonding[J].Materials Science and Engineering:A,2013,582(0):294-298.,2013.
[59] 孔凡涛,陈玉勇.γ-TiA1/TC4复合板材的制备及组织性能研究[J].稀有金属材料与工程,2009(08):1484-1486.
[60] KONG F T,CHEN Y Y,ZHANG D L .Interfacial microstructure and shear strength of Ti-6Al-4V/TiAl laminate composite sheet fabricated by hot packed rolling[J].Materials and Design,2011,32(6):3167-3172.,2011.
[61] TOKITA M .Trends in advanced SPS spark plasma sintering systems and technology[J].J Soc Powder Tech (Jpn),1993,30(11):790-804.,1993.
[62] MEI B C,MIYAMOTO Y .Preparation of Ti-Al intermetallic compounds by spark plasma sintering[J].Metallurgicaland Materials Transactions:A,2001,32(3):843-847.,2001.
[63] SUN Y B,VAJPAI S K,AMEYAMA K,et al .Fabrication of multilayered Ti-Al intermetallics by spark plasma sintering[J].Journal of Alloys and Compounds,2014,585(0):734-740.,2014.
[64] 徐磊,崔玉友,杨锐 .循环轧制法制备Ti/TiAl3层状复合材料[J].稀有金属材料与工程,2005,34:40-42.(XU L,CUI Y Y,YANG R.Fabrication of Ti/TiAl3 laminated metal composites by cyclic rolling process[J].Rare Metal Materials and Engineering,2005,34 (Suppl 3):40-42.),2005.
[65] XU W H,MENG X K,YUAN C S,et al .The synthesis and mechanical property evaluation of Ni/Ni3 Al microlaminates[J].Materials Letters,2000,46(5):303-308.,2000.
[66] GACHON J C,ROGACHEV A S,GRIGORYAN H E,et al .On the mechanism of heterogeneous reaction and phase formation in Ti/Al multilayer nanofilms[J].Acta Materialia,2005,53(4):1225-1231.,2005.
[67] ROWE R G,SKELLY D W,JACKSON M R,et al .Advanced aircraft engine microlaminated intermetallic composite turbine technology[J].Layered Materials for Structural Applications,1996,434
[68] GAVENS A,HEERDEN D V,WEIHS T,et al .Fabrication and evaluation of Nb/Nb5 Si3 microlaminate foils[J].Metallurgical and Materials Transactions:A,1999,30(11):2959-2965.,1999.
[69] 章德铭,陈贵清,孟松鹤,曲伟,韩杰才.电子束物理气相沉积TiAl基合金薄板的物相及显微分析[J].稀有金属材料与工程,2007(06):973-976.
[70] 马李,孙跃,赫晓东.Ti/Ti-Al微叠层复合材料的微观组织与性能研究[J].材料工程,2007(增刊1):69-72.(MA L,SUN Y,HAO X D.Study on micriostructures and mechanical properties of Ti/Ti-Al microlaminated composite[J].Journal of Materials Engineering,2007 (Suppl 1):69-72.),2007.
[71] 马李,孙跃,赫晓东.Ti/Ti-Al大尺寸微叠层材料的制备与性能研究[J].稀有金属材料与工程,2008(02):325-329.
[72] 申造宇,黄光宏,何利民,牟仁德,常振东.大尺寸TiAl/Ti3Al微叠层薄板制备与热稳定性研究[J].材料研究学报,2014(04):314-320.
[73] 马李 .Ti/Ti-Al微层板的设计与EB-PVD工艺制备研究[D].哈尔滨工业大学,2008.
[74] 李亚江,魏守征,PUCHKOV U A.特种加工技术在某新型微叠层复合材料中的应用[J].航空制造技术,2012(15):51-55.(LI Y J,WEI S Z,PUCHKOV U A.Application of special processing technology in microlaminate composites[J].Aeronautical Manufacturing Technology,2012 (15):51-55.),2012.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
作者相关
文章评分
  • 您的评分：
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%

版权所有©2010中国科学院金属研究所中国科技出版传媒股份有限公司

本系统由北京仁和汇智信息技术有限公司设计开发

技术支持：info@rhhz.net