在模拟实验低真空环境下,将T b ,Dy及Fe合金元素经过熔炼、定向凝固、热处理后,制备了T b0.27 Dy0.73 Fe1.91合金棒。测试合金棒的磁致伸缩性能,研究材料的组织结构,分析组织中缺陷产生的原因。结果表明:在低真空环境下,大量的孪生枝晶片层和普通孪晶组织产生,其中片层状孪晶具有良好的压磁效应和力学性能,而普通孪晶的产生对材料磁致伸缩性能产生不利影响。合金基体主要相为REFe2与REFe3耦合相,烧损导致合金的成分偏离,造成包晶REFe2相和初生REFe3相的耦合生长。与此同时,存在由于热应力产生的微裂纹和稀土元素偏聚烧损后产生的孔洞。这些组织和缺陷对TbDyFe合金棒的磁致伸缩性能和力学性能产生不利影响。
In order to simulate low vacuum experimental environment ,Tb0 .27 Dy0 .73 Fe1 .91 alloy round bars were prepared through melting with Tb ,Dy and Fe elements ,directional solidification and heat treatment in low vacuum environment .T he magnetostriction of the alloy rods w as tested .T he micro‐structures and the causes of defects in the alloy w ere investigated .T he results indicate that under the low vacuum experimental environment ,there are plenty of twin dendritic lamellar microstructures and ordinary twin microstructures are generated in alloy ,among which the mechanical properties and“jump” effect of twin dendritic lamellar structures are good ,while the ordinary twins are bad to the magnetostrictive property in the alloy .REFe2 and REFe3 coupling phase is the main phase in the ma‐trix ,the burning loss of rare earth elements lead variations in chemical composition ,resulting cou‐pling growth with REFe3 phase and REFe2 phase .The thermal stress and the burning loss of rare earth elements segregate at grain boundaries resulting in the presence of micro‐cracks and micro‐holes . These microstructures and defects generate bad impact on mechanical properties and magnetostriction of TbDyFe alloy rods .
参考文献
[1] | 贾宇辉;谭久彬;张杰.超磁致伸缩微位移驱动器的研究[J].微细加工技术,2000(2):70-74,54. |
[2] | 李冲;鹿存跃;马艺馨.基于磁致伸缩材料的电机研究进展[J].压电与声光,2015(4):585-589. |
[3] | 唐鸿洋;张洪平;张羊换;张胤.超磁致伸缩合金TbDyFe组织与性能研究现状[J].金属功能材料,2013(2):45-51. |
[4] | 郭东明;杨兴;贾振元;武丹.超磁致伸缩执行器在机电工程中的应用研究现状[J].中国机械工程,2001(6):724-727. |
[5] | 刘繁茂;张慧燕;张涛.Fe-Nd-B-Zr块体非晶合金的形成能力和磁性能[J].材料工程,2014(10):6-10. |
[6] | 陈洁;袁铁江.柠檬酸根对纳米Fe3O4制备及其性能的影响[J].材料工程,2015(6):85-89. |
[7] | 柳美荣;蒋成保;宫声凯;徐惠彬.超磁致伸缩合金TbDyFe的晶体生长过程[J].材料研究学报,2002(3):307-312. |
[8] | C.Jiang;S.Zhou;H.Xu;R.Wang.Investigation on the formation of the preferred orientations in aTbDvFe allov with directional solidification[J].Materials Science & Engineering, B. Solid-State Materials for Advanced Technology,19993(3):191-194. |
[9] | 周美政;季诚昌;朱世根.TbDyFe合金的定向凝固和取向生长[J].科技导报,2007(4):35-38. |
[10] | Bonino O.;Tournier R.;De Rango P..< 1 1 0) Directional growth of polycrystalline magnetostrictive TbxDy1-xFey compounds by casting in a strong unidirectional gradient[J].Journal of Magnetism and Magnetic Materials,20001/2(1/2):225-230. |
[11] | 马伟增;季诚昌;李建国.电磁悬浮熔炼(TbDy)Fe2合金的耦合生长[J].稀有金属材料与工程,2004(2):201-203. |
[12] | 武伟;张茂才;高学绪;周寿增.回火处理对〈110〉取向TbDyFe超磁致伸缩材料冲击韧性的影响[J].金属学报,2005(10):1009-1012. |
[13] | 胡勇;丁雨田;王晓莉;李晓诚;王国斌.〈110〉取向Tb-Dy-Fe超磁致伸缩材料的热处理工艺[J].材料热处理学报,2012(11):6-11. |
- 下载量()
- 访问量()
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%