20％纳米 ZrO2（3Y）粉末加入到高纯亚微米 Al2 O3粉中，采用高压干压成型方法和恒速升温多阶段短保温烧结方法制备出不同烧结温度下的复相陶瓷。研究烧结温度对复相陶瓷力学性能的影响，通过 XRD，EDS 和 SEM 对复相陶瓷进行元素组成和微观结构分析。结果表明：烧结温度在很大程度上影响着复相陶瓷的力学性能和微观结构，常压烧结1600℃保温8h 时，相对密度、维氏硬度和断裂韧性达到最大，分别为98．6％，18．54GPa 和9．3MPa·m1／2，而基体晶粒尺寸为1．4～8．1μm，ZrO2相变量为34．6％。1600℃下复相陶瓷具有优质的微观结构，断裂方式为沿晶-穿晶混合断裂模式。ZrO2（3Y）粉体的加入，从相变增韧、内晶型颗粒增韧和裂纹偏转等多个方面提高了复相陶瓷的断裂韧性。
20% nano ZrO2 (3Y)powders were added to high purity submicron Al2 O3 powders,then composite ceramics were prepared by high-pressure dry pressing and constant heating,multi-stage, short insulation sintering method at different temperatures.The effect of sintering temperature on mechanical properties of composite ceramics was investigated,the phase composition and microstruc-ture of composite ceramics were analyzed by XRD,EDS and SEM.The results show that the sintering temperature affects the mechanical properties and microstructure of composite ceramics greatly.The relative density,vickers hardness and fracture toughness reach the maximum value,respectively 98.6%,18.54GPa and 9.3MPa·m1/2 under atmospheric sintering at 1600℃ and insulation 8h.While the grain size of the matrix is about 1.4-8.1μm and ZrO2 phase transition is 34.6%.Composite ceram-ics have excellent microstructure sintered at 1600℃.The fracture mode of the composite ceramics is intergranular-transgranular mixed fracture mode.The fracture toughness of the composite ceramics is improved by phase transition toughening,intragranular particles toughening,crack deflection and other aspects when adding nano-sized ZrO2 (3Y)powder.
参考文献
| [1] | RAO P G;IWASA M;KONDOH I .Properties of low-tempera-ture-sintered high purityα-alumina ceramics[J].Journal of Mate-rials Science Letters,2000,19(07):543-545. |
| [2] | 陈维平,韩孟岩,杨少锋.A12O3陶瓷复合材料的研究进展[J].材料工程,2011(03):91-96. |
| [3] | WANG J;STEVENS R .Review zirconia-toughened alumina (ZTA)ceramics[J].Journal of Materials Science,1989,24(10):3421-3440. |
| [4] | NIIHARA K J .New design concept of structural ceramics:ce-ramic nano-composites[J].Journal of the American Ceramic Soci-ety,1992,75(09):2363-2372. |
| [5] | 王昕,孙康宁,尹衍升,候耀永,周玉.纳米复合陶瓷材料研究进展[J].复合材料学报,1999(01):105-110. |
| [6] | LIU G W;XIE Z P;WU Y .Effectively inhibiting abnormal grain growth of alumina in ZTA with low-content fine-sized ZrO2 inclu-sions introduced by infiltration and in situ precipitation[J].Jour-nal American Ceramic Society,2010,93(12):4001-4004. |
| [7] | 高翔,丘泰,焦宝祥,沈春英.纳米ZrO2对Al2O3陶瓷性能的影响[J].硅酸盐通报,2005(01):12-16. |
| [8] | MA W M;WEN L;GUAN R G et al.Sintering densification,microstructure and transformation behavior of Al2 O3/ZrO2 (Y2 O3)composites[J].MATERIALS SCIENCE & ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2008,477:100-106. |
| [9] | ZHENG Y T;LI H B;ZHOU T et al.Microstructure and me-chanical properties of Al2 O3/ZrO2 eutectic ceramic composites prepared by explosion synthesis[J].Journal of Alloys and Com-pounds,2013,55:475-480. |
| [10] | 果世驹.粉末烧结理论[M].北京:冶金工业出版社,1985 |
| [11] | 喇培清,刘雪梅,卢学峰,张秀萍.工艺参数对Fe3Al/Al2O3复合材料力学性能的影响研究[J].粉末冶金技术,2011(01):21-26. |
| [12] | Shufeng Li,Hiroshi Izui,Michiharu Okano,Weihua Zhang,Taku Watanabe.Microstructure and mechanical properties of ZrO2 (Y2O3)-Al2O3 nanocomposites prepared by spark plasma sintering[J].颗粒学报（英文版）,2012(03):345-351. |
| [13] | 陈振华;陈鼎.现代粉末冶金原理[M].北京:化学工业出版社,2012 |
| [14] | 王昕,YU Xue-gang,单妍,LIU Zi-feng,尹衍升.内晶结构复相陶瓷的裂纹扩展行为[J].材料热处理学报,2008(04):52-55,59. |
| [15] | 王昕,单妍,于薛刚,徐静,尹衍升,周玉.纳米ZrO2-微米Al2O3复合陶瓷中"内晶型"结构的形成与机理[J].硅酸盐学报,2003(12):1145-1149. |
| [16] | 王昕,单妍,龚红宇,于薛刚,徐静,尹衍升.Formation mechanism of intragranular structure in nano-composites[J].中国有色金属学会会刊(英文版),2004(02):265-269. |
| [17] | 林广涌.晶须增韧陶瓷基复合材料强韧化机制的评述[J].华南理工大学学报（自然科学版）,1996(07):34. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%