欢迎登录材料期刊网

材料期刊网

中国科学院金属研究所 科学出版社
高级检索
  1. 首页
  2. 期刊
  3. 材料工程
  4. 结构胶胶接汽车车身金属接头抗环境腐蚀性能研究进展

材料工程, 2015, 43(3): 98-105. doi: 10.11868/j.issn.1001-4381.2015.03.017

结构胶胶接汽车车身金属接头抗环境腐蚀性能研究进展

郑锐 1, , 林建平 2, , 吴倩倩 3, , 吴泳荣 4,

1.同济大学机械与能源工程学院,上海,201804

2.同济大学机械与能源工程学院,上海,201804

3.同济大学机械与能源工程学院,上海,201804

4.同济大学机械与能源工程学院,上海,201804

关键词： 汽车车身金属 , 胶接接头 , 环境腐蚀 , 扩散 , 电化学腐蚀 , 界面

Progress in Research on Environmental Corrosion-resistance of Structural Adhesive Bonding Automotive-body Metal Joint

Keywords： automotive-body metal , adhesive bonding joint , environmental corrosion , diffusion , electrochemical corrosion , interface

本文从环境暴露时腐蚀介质的传输规律研究、环境暴露对汽车车身金属胶接接头力学性能影响及其降级机理、金属被粘物表面处理技术几个方面对其胶接接头腐蚀方面的研究现状进行了综述,并探讨了金属胶接接头环境抗腐蚀性能研究的发展趋势,认为腐蚀介质在胶接接头界面的扩散规律、接头金属表面的电化学反应破坏其界面结合性能的机理及规律、金属接头中的电化学腐蚀规律及电化学反应对黏合性能和接头强度影响等方面是今后的主要研究重点.

参考文献

[1] DETLEF S,ANDREAS L.Structural Bonding in Automobile Manufacturing[M].Germany:Dow Automotive,2007:4-10.,2007.
[2] BORSELLINO C,DI BELLA G,RUISI V F .Adhesive joining of aluminium AA6082:The effects of resin and surface treatment[J].International Journal of Adhesion & Adhesives,2009,29(1):36-44.,2009.
[3] FRIGIONE M,AIELLO M A,NADDEO C .Water effects on the bond strength of concrete/concrete adhesive joints[J].Construction and Building Materials,2006,20(10):957-970.,2006.
[4] 焦洁清.铝合金胶接接头环境破坏机理[J].粘接,1987(02):1.
[5] BHOWMIK S,BONIN H W,BUI V T,et al .Durability of adhesive bonding of titanium in radiation and aerospace environments[J].International Journal of Adhesion & Adhesives,2006,26(6):400-405.,2006.
[6] ZANNI-DEFFARGES M P,SHANAHAN M E R .Diffusion of water into an epoxy adhesive:comparison between bulk behavior and adhesive joints[J].International Journal of Adhesion and Adhesives,1995,15(3):137-142.,1995.
[7] COMYN J.Kinetics and Mechanisms of Environmental Attack.Durability of Structural Adhesives[M].London:Applied Science,1983:85-129.,1983.
[8] SRIVASTAVA V K,HOGG P J .Moisture effects on the toughness,mode-Ⅰ and mode-Ⅱ of particles filled quasi-isotropic glassfibre reinforced polyester resin composites[J].Journal of Materials Science,1998,33(5):1129-1136.,1998.
[9] SRIVASTAVA V K .Influence of water immersion on mechanical properties of quasi-isotropic glass fiber reinforced epoxy vinylester resin composites[J].Materials Science and Engineering A,1999,263(1):56-63.,1999.
[10] TCHARKHTCHI A,BRINNEC P Y,VERDU J .Water absorption characteristics of diglycidylether of butane diol-3,5-diethyl-2,4-diaminotoluene networks[J].Polymer,2000,41(15):5777-5785.,2000.
[11] AL-HARTH1 M,LOUGHLIN K,KAHRAMAN R .Moisture diffusion into epoxy adhesive:testing and modeling[J].Adsorption,2007,13(2):115-120.,2007.
[12] BARTON A F M.Handbook of solubility and other cohesion parameters[M].Boca Raton,FL:CRC Press,1985:238-239.,1985.
[13] BELLENGER V,VERDU J,MOREL E .Structure-properties relationships for densely cross-linked epoxide amine systems based on epoxide or amine mixtures 2:Water absorption and diffusion[J].Journal of Materials Science,1989,24(1):63-68.,1989.
[14] ZHOU J M,LUCAS J P .Hygrothermal effects of epoxy resin Part Ⅰ:the nature of water in epoxy[J].Polymer,1999,40(20):5505-5512.,1999.
[15] CRANK J,PARK G S.Water in Polymers,Diffusion in Polymers[M].London:Academic Press,1968:259-313.,1968.
[16] LOH W K,CROCOMBE A D,ABDEL WAHAB M M,et al .Modelling anomalous moisture uptake,swelling and thermal characteristics of a rubber toughened epoxy adhesive[J].International Journal of Adhesion & Adhesives,2005,25(1):1-12.,2005.
[17] MUBASHAR A,I ASHCROFT A,CRITCHLOW G W,et al .Moisture absorption-desorption effects in adhesive joints[J].International Journal of Adhesion & Adhesives,2009,29(8):751-760.,2009.
[18] BALDAN A .Review:adhesively-bonded joints and repairs in metallic alloys,polymers and composite materials:adhesives,adhesion theories and surface pretreatment[J].Journal of Materials Science,2004,39(1):1-49.,2004.
[19] COMRIE R,AFFROSSMAN S,DAVID H,et al .Ageing of adhesive bonds with various surface treatments,part 1:aluminum-dicyandiamide cured epoxy joints[J].The Journal of Adhesion,2005,81(12):1157-1181.,2005.
[20] BOWDITCH M R .The durability of adhesive joints in the presence of water[J].International Journal of Adhesion & Adhesives,1996,16(2):73-79.,1996.
[21] LAPIQUE F,REDFORD K .Curing effects on viscosity and mechanical properties of a commercial epoxy resin adhesive[J].International Journal of Adhesion & Adhesives,2002,22(4):337-346.,2002.
[22] MAYS G C,HUTCHINSON A R.Adhesives in Civil Engineering[M].Cambridge:Cambridge University Press,1992:163-170.,1992.
[23] SHAW S J.Epoxy Resin Adhesives,Chemistry and Technology of Epoxy Resins[M].London:Blackie Academic & Professional,1993:206-255.,1993.
[24] 高岩磊,周二鹏,郧海丽,熊金平.环氧/铝胶接接头在氯化钠水溶液中的老化行为[J].热固性树脂,2011(03):18-20.
[25] MARIATERESA L,MARIAENRICA F .Effects of humid environment on thermal and mechanical properties of a cold-curing structural epoxy adhesive[J].Construction and Building Materials,2012,30
[26] LIUZL,SUNRN,MAOZP,etal .Effects of phosphate pretreatment and hot-humid environmental exposure on static strength of adhesive-bonded magnesium AZ31 sheets[J].Surface & Coatings Technology,2012,206(16):3517-3525.,2012.
[27] RIDER A N,ARNOTT D R .Boiling water and silane pre-treatment of aluminium alloys for durable adhesive bonding[J].International Journal of Adhesion & Adhesives,2000,20(3):209-220.,2000.
[28] DAVIS G D,WHISNANT P L,VENABLES J D .Subadhesive hydration of aluminum adherends and its detection by electrochemical impedance spectroscopy[J].Journal of Adhesion Science and Technology,1995,9(4):433-442.,1995.
[29] BROCKMANN W,HENNEMANN O D,KOLLEK H,et al .Adhesion in bonded aluminium joints for aircraft construction[J].International Journal of Adhesion & Adhesives,1986,6(3):115-143.,1986.
[30] LUNDER O,OLSENB B,NISANCIOGLU K .Pre-treatment of AA6060 aluminium alloy for adhesive bonding[J].International Journal of Adhesion & Adhesives,2002,22(2):143-150.,2002.
[31] LUNDER O,LAPIQUE F,JOHNSEN B,et al .Effect of pretreatment on the durability of epoxy-bonded AA6060 aluminum joints[J].International Journal of Adhesion & Adhesives,2004,24(4):107-117.,2004.
[32] VERA R,DELGADO D,ROSALES BLANCA M .Effect of atmospheric pollutants on the corrosion of high power electrical conductors:part 1 aluminum and AA6201 alloy[J].Corrosion Science,2006,48(10):2882-2900.,2006.
[33] DONG C F,SHENG H,AN Y H,et al .Corrosion of 7A04 aluminum alloy under defected epoxy coating studied by localized electrochemical impedance spectroscopy[J].Progress in Organic Coatings,2010,67(3):269-273.,2010.
[34] UNDERHILL P R,DUQUESNAY D L .The role of corrosion/oxidation in the failure of aluminum adhesive joints under hot,wet conditions[J].International Journal of Adhesion & Adhesives,2006,26:88-93.,2006.
[35] WAN T T,LIU Z X,BUM Z,etal .Effect of surface pretreatment on corrosion resistance and bond strength of magnesium AZ31 alloy[J].Corrosion Science,2013,66
[36] FERNANDO M,HARJOPRAYITNO W W,KINLOCH A J .A fracture mechanics study of the influence of moisture on the fatigue behaviour of adhesively bonded aluminum-alloy joints[J].International Journal of Adhesion and Adhesives,1996,16(2):113-119.,1996.
[37] LOH W K,CROCOMBE A D,ABDEL WAHAB M M,et al .Environmental degradation of the interfacial fracture energy in an adhesively bonded joint[J].Engineering Fracture Mechanics,2002,69(18):2113-2128.,2002.
[38] HADAVINIA H,KINLOCH A J,LITTLE M S G,et al .The prediction of crackgrowth in bonded joints under cyclic-fatigue loading I.Experimental studies[J].International Journal of Adhesion and Adhesives,2003,23(6):449-461.,2003.
[39] DIGBY R P,PACKHAM D E .Pretreatment of aluminmum:topography,surface chemistry and adhesive bond durability[J].International Journal of Adhesion and Adhesives,1995,15(2):61 71.,1995.
[40] SHAFFER D K,DAVIS G D,MCNAMARA D K,et al .Durability properties for adhesively bonded structural aerospace applications[J].International SAMPE Metals and Metals Processing Conference,1992,3
[41] BALDAN A .Adhesion phenomena in bonded joints[J].International Journal of Adhesion & Adhesives,2012,38
[42] KINLOCH A J .The science of adhesion[J].Journal of Materials Science,1980,15(9):2141-2166.,1980.
[43] RECHNER R,JANSEN I,BEYER E .Influence on the strength and aging resistance of aluminium joints by laser pretreatment and surface modification[J].International Journal of Adhesion & Adhesives,2010,30(7):595-601.,2010.
[44] YANG H J,ZHANG Y S,LAI X M,et al .Method for repairing of adhesive-bonded steel[J].Materials and Design,2010,31(1):260-266.,2010.
[45] BROAD R,FRENCH J,SAUER J .New,effective,ecological surface pretreatment for highly durable adhesively bonded metal joints[J].International Journal of Adhesion & Adhesives,1999,19:1935-198.,1999.
[46] KINLOCH A J,ABBEY W.The Service Performance of Structural Adhesive Joints[R].Bremen,West Germany:Adhesion As a Basis for Joints.1982:181.,1982.
[47] CRITCHLOW G W,BREWIS D M .Influence of surface macroroughness on the durability of epoxide-aluminium joints[J].International Journal of Adhesion & Adhesives,1995,15(3):173-176.,1995.
[48] PETRIE EDWARD M .Adhesive bonding of aluminum alloys[J].Metal Finishing,2007,105(9):49-56.,2007.
[49] 杨孚标,肖加余,曾竟成,邢素丽,王遵,姜楠.铝合金磷酸阳极化及胶接性能分析[J].材料工程,2006(02):7-11.
[50] ZHANG J S,ZHAO X H,ZUO Y,et al .The bonding strength and corrosion resistance of aluminum alloy by anodizing treatment in a phosphoric acid modified boric acid/sulfuric acid bath[J].Surface &Coatings Technology,2008,202(14):3149-3156.,2008.
[51] WAN T T,LIU Z X,BUM Z,et al .Effect of Na2MoO4 on bond strength of adhesive-bonded phosphate coated magnesium AZ31sheets[J].International Journal of Adhesion & Adhesives,2013,40
[52] LI G L,WANG X M,LI A J,et al .Fabrication and adhesive properties of thin organosilane films coated on low carbon steel substrates[J].Surface & Coatings Technology,2007,201(24):9571-9578.,2007.
[53] 张颖怀,许立宁,路民旭.硅烷处理对有机涂层/金属胶接接头力学性能的影响[J].材料工程,2009(05):30-33,37.
[54] YUE Y Y,LIU Z X,WAN T T,et al .Effect of phosphate-silane pretreatment on the corrosion resistance and adhesive-bonded performance of the AZ31 magnesium alloys[J].Progress in Organic Coatings,2013,76(5):835-843.,2013.
[55] GLEDHILL R A,SHAW S J,TODD A .Durability of adhesive-bonded joints employing organosilane coupling agents[J].International Journal of Adhesion & Adhesives,1990,10(3):192-198.,1990.
[56] BERTHO J,STOLOJAN V,ABEL M L,et al .The effect of silane incorporation on a metal adhesive interface:a study by electron energy loss spectroscopy[J].Micron,2010,41(2):130-134.,2010.
[57] KRAM M,JANSEN K M B,ERNST L J,et al .Atmospheric pressure plasma surface modification of titanium for high temperature adhesive bonding[J].International Journal of Adhesion & Adhesives,2011,31(7):598-604.,2011.
[58] UNDERHILL P R,RIDERA N,DUQUESNAY D L .The effect of warm water surface treatments on the fatigue life in shear of aluminum joints[J].International Journal of Adhesion & Adhesives,2006,26(4):199-205.,2006.
[59] SALEEMA N,SARKAR D K,PAYNTER R W,et al .A simple surface treatment and characterization of AA 6061 aluminum alloy surface for adhesive bonding applications[J].Applied Surface Science,2012,261(15):742-748.,2012.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
作者相关
文章评分
  • 您的评分：
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%

版权所有©2010中国科学院金属研究所中国科技出版传媒股份有限公司

本系统由北京仁和汇智信息技术有限公司设计开发

技术支持：info@rhhz.net