为查明某贫硫化物碳酸盐型微细粒难处理金矿石工艺特性,对其进行了工艺矿物学研究,包括矿石矿物组成、主要矿物嵌布特征、嵌布粒度、金矿物工艺特征等.结果表明:矿石平均金品位15.17 g/t、硫0.65%、有机碳0.47%,有机碳吸附金占40.10%,金为唯一有价元素;矿石中有机碳含量高,而硫化物含量低,金矿物粒度微细并与脉石关系密切,脉石矿物泥化严重等均会影响金的回收.研究结果对该类型矿石的开发具有一定的指导意义.
To find out the process mineralogy of one carbonate micro-fine refractory gold ore with low sulfide con-tent,the paper carried out process mineralogy study on it,including mineral composition,embedding characteristics, embedding grain size,mineralogical characteristics of gold minerals. The results show that the average gold grade is 15. 17 g/t,sulfur grade 0. 65 % and organic carbon grade 0. 47 %,40. 10 % gold is adsorbed by organic carbon,and gold is the only valuable element;the organic carbon content is high in the ore,but the sulfur content is low; severe argillization of gangue minerals and the fact that the grain size of gold minerals is micro-fine and closely related with gangues will both affect gold recovery. The results have certain guiding significance for the exploitation of the same type ores.
参考文献
| [1] | 谢海云;叶群杰;周平;高利坤;庄故章;童雄.云南思茅地区铜锌硫化矿工艺矿物学分析[J].岩矿测试,2014(3):345-352. |
| [2] | 马驰;卞孝东;王守敬;郭俊刚;王盘喜.金矿石的工艺矿物学研究[J].黄金,2011(10):47-51. |
| [3] | 王少东;乔吉波.云南某氧化铅锌矿选矿工艺研究[J].有色金属（选矿部分）,2011(4):23-26. |
| [4] | 吕宪俊;高清寿.陕西安康金红石矿工艺矿物学研究[J].矿产保护与利用,1999(06):37-40. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%