针对某微细粒含砷难处理金矿石性质,进行了金回收工艺试验研究.矿石中金品位4.14 g/t,砷品位1.80％,金属矿物以赤褐铁矿、毒砂为主.矿石中金的粒度较细,以显微金为主,约占矿石中金的66.67％.通过对单一浮选、浮选—氰化浸出、全泥氰化浸出等工艺流程进行探索试验表明:采用浮选—氰化浸出流程处理该矿石,金总回收率达84.82％,但金精矿中砷含量超标,可采用冶金方法进行后续金精矿降砷试验;采用原矿全泥氰化浸出流程,金回收率73.61％,浸渣中砷质量分数1.71％左右,指标相对较好.
The paper carried out experimental research on gold recovery process according to the property of one refractory arsenic-containing micro-fine gold ore.The gold grade of the ore is 4.14 g/t,arsenic grade is 1.80 ％,and the main minerals are hematite,limonite and arsenopyrite.Gold is deposited in fine grains,mainly taking the form of microscopic gold that takes up 66.67 ％ of the entire gold grains in ores.Experiments that have explored single flotation,flotation-cyanidation,all-sliming cyanidation and such processes show that flotation-cyanidation process can obtain a total gold recovery rate of 84.82 ％ but excessive amount of arsenic in gold concentrates as well,which,however,can be subjected to metallurgic tests to reduce arsenic;all-sliming cyanidation can obtain a gold recovery of 73.61％ with arsenic grade of 1.71％ in leaching slags,which is good index.
参考文献
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%