以新疆星塔金矿矿石为研究对象,采用短圆柱型磨矿介质(铸铁段)和钢球对二段磨矿效果进行了对比磨矿试验,最终确定了选矿厂矱2.1 m×3.5 m溢流型球磨机的初装介质尺寸组成m(35×40):m(30×35):m(25×30)=30:30:40.在相同的磨矿条件下,铸铁段Ⅰ的磨矿产品中+0.15 mm过粗粒级、-0.01 mm过粉碎粒级产率比最佳钢球配比的分别低0.77百分点、0.15百分点,-0.15~+0.01 mm易选粒级和-0.074 mm产率比最佳钢球配比的分别高0.92百分点、0.54百分点.工业试验结果表明:采用铸铁段后磨矿细度增加4.90百分点,金回收率提高0.77百分点,金精矿品位增加13.0%;铸铁段因其独特的优势可以作为细磨介质在选矿厂推广应用.
Taking the ores from Xingta Gold Mine in Xinjiang as the research object ,the research starts with a comparison made between the effects of short cylindrical grinding media ( cast iron segments ) and steel ball grinding media on the second-stage grinding process,and the size composition of initial loading media (m(35 ×40):m(30 × 35):m(25 ×30)=30:30:40) is determined for the 矱2.1 m ×3.5 m overflow ball mill in the dressing plant .The test results indicated that under the same grinding conditions ,the content of +0 .15 mm coarse fraction and -0 .01 mm o-ver-ground fraction is reduced by 0.77 and 0.15 percentage points,and the content of -0.15 mm to +0.01 mm eas-y-to-dress fraction and -0.074 mm fraction is increased by 0.92 and 0.54 percentage points respectively for the products of cast iron segmentⅠcompared with the optimal ratio of steel balls .The industrial test results show that the grinding fineness is increased by 4.90 percentage points,the gold recovery increased by 0.77 percentage points and the gold grade increased by 13.0 %.In conclusion ,the short cylindrical grinding media ( cast iron segments ) can re-place steel balls as finely grinding media and be extensively applied in gold dressing plants for their unique advantage .
参考文献
| [1] | 韩跃新;朱一民;王泽红;田祎兰.介质特性对铝土矿在振动磨机中选择性磨矿的影响[J].现代矿业,2009(4):36-39,122. |
| [2] | 张锦瑞;梁冰;赵礼兵.球磨机机理与磨矿介质制度研究现状及发展趋势[J].有色矿冶,2013(1):42-45,54. |
| [3] | 康怀斌;肖庆飞;秦洪训;王彩霞;李进友.精确化装补球方法在大尹格庄金矿中的应用研究[J].黄金,2015(6):53-56. |
| [4] | 汪太平;肖庆飞;李博;康怀斌.精确化装补球制度在冬瓜山铜矿的应用研究[J].昆明理工大学学报（自然科学版）,2015(4):23-27. |
| [5] | 曾桂忠;鲁顺利;段希祥.新型磨矿介质在金川铜镍精矿降镁工艺中的应用[J].矿产综合利用,2008(1):18-21. |
| [6] | 张国范;冯其明;陈启元;张平民.铝土矿选择性磨矿中磨矿介质的研究[J].中南大学学报(自然科学版),2004(4):552-556. |
| [7] | 金弢;李若兰;郭永杰.钢锻在磷矿磨矿中的应用研究[J].化工矿物与加工,2014(10):18-22,30. |
| [8] | 凌永发;段希祥.细磨介质形状的选择及应用研究[J].有色金属(选矿部分),2001(6):41-44,35. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%