针对大红山铜矿西部矿段的点柱式上向水平分层充填采矿法，采用FLAC3D数值模拟软件对该采矿方法的设计点柱参数进行稳定性分析，模拟开挖和充填状态下顶底板位移及点柱、围岩弹塑性应力状态。结果表明，留设4 m ×4 m规格的点柱，沿走向间距16 m，沿倾向间距15 m，围岩及矿柱是不稳定的，易发生剪切破坏。建议开展点柱尺寸和间距优化研究，以确保采场稳定。
For the upward horizontal slice stoping and filling method with pointed pillars applied in west mining section in Dahongshan Copper Mine ,stability analysis of the parameters of designed pointed pillars is made by using FLAC3D ,simulating the elastic-plastic stress state of the pointed pillars and surrounding rocks and the displacement of roof and floor plate during excavation and filling .Results indicate that the 4 m ×4 m pillars with strike separation 16 m and dip separation 15 m are unstable ,shear failure easy to occur .This paper suggests that size of pillars and separation of pointed pillars be optimized to make the stope stable .
参考文献
| [1] | 赵丽琼,张应平.尾砂充填技术在大红山铜矿的运用与研究[J].环境科学导刊,2013(03):58-60. |
| [2] | 张小刚,刘超,彭康,陶晓杰,于常先,王德全,李阳.点柱式分层充填采矿法在海下矿床开采中的应用[J].采矿技术,2010(01):13-14,35. |
| [3] | 彭文斌.FLAC3D实用教程[M].北京:机械工业出版社,2007 |
| [4] | 韩庆;徐俊;成子桥.上向分层(点柱式)充填开采厚大矿体稳定性研究[J].水利水电施工,2013(01):62-64. |
| [5] | 乔登攀,侯国权.沙漠特厚风砂层下某铁矿水平隔离矿柱厚度的确定[J].金属矿山,2013(02):7-9,17. |
| [6] | 彭康,李夕兵,彭述权,刘志祥,赵国彦,刘爱华.海下点柱式开采的有限元动态模拟分析[J].金属矿山,2009(10):59-62. |
| [7] | 彭康,李夕兵,彭述权,赵国彦,刘志祥,姚银佩.三山岛金矿中段盘区间合理回采顺序动态模拟选择[J].矿冶工程,2010(03):8-11. |
| [8] | 彭康,李夕兵,彭述权,刘志祥,赵国彦.海底下框架式分层充填法开采中矿岩稳定性分析[J].中南大学学报（自然科学版）,2011(11):3452-3458. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%