欢迎登录材料期刊网

材料期刊网

高级检索

8YSZ纳米粉(晶粒度为20nm)在800~1200℃范围内煅烧12h(温度间隔100℃),然后用大气等离子喷涂方法制备相应的涂层.对涂层的相成分、结构、结合强度、弹性模量和热震性能进行了详细分析.分析结果表明:当粉末的煅烧温度高于1000℃时,8YSZ晶粒度明显增大;涂层为双模式结构即熔化区和未熔化区,涂层的密度和熔化程度随温度升高而增加,并导致硬度和弹性模量增大;1200℃煅烧粉末所制备的涂层由于微裂纹或微孔缺陷增加,导致涂层的弹性模量减小.涂层的失效原因主要归因于热膨胀系数不匹配,涂层的热震寿命与其弹性模量呈反比关系.

参考文献

[1] 胡长均;王铀;吴朝军.热喷涂纳米结构热障涂层的最新研究[J].热加工工艺,2007(11):53-57.
[2] Lima RS;Marple BR.Nanostructured YSZ thermal barrier coatings engineered to counteract sintering effects[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,20081/2(1/2):182-193.
[3] Hossein Jamali;Reza Mozafarinia;Reza Shoja Razavi.Comparison of thermal shock resistances of plasma-sprayed nanostructured and conventional yttria stabilized zirconia thermal barrier coatings[J].CERAMICS INTERNATIONAL,20128(8):6705-6712.
[4] Khan AN;Lu J.Thermal cyclic behavior of air plasma sprayed thermal barrier coatings sprayed on stainless steel substrates[J].Surface & Coatings Technology,200726(26):4653-4658.
[5] 姚星合;朱永平;张伟刚.热处理工艺对纳米氧化锆粉体微观结构与涂层性能的影响[J].过程工程学报,2011(1):124-130.
[6] LIU Chun-bo;ZHANG Zhi-min;JIANG Xian-liang;LIU Min;ZHU Zhao-hui.Comparison of thermal shock behaviors between plasma-sprayed nanostructured and conventional zirconia thermal barrier coatings[J].中国有色金属学会会刊(英文版),2009(01):99-107.
[7] Nath, Subhasisa;Manna, Indranil;Majumdar, Jyotsna Dutta.Nanomechanical behavior of yttria stabilized zirconia (YSZ) based thermal bather coating[J].CERAMICS INTERNATIONAL,20154(4):5247-5256.
[8] Wang WQ;Sha CK;Sun DQ;Gu XY.Microstructural feature, thermal shock resistance and isothermal oxidation resistance of nanostructured zirconia coating[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,20061-2(1-2):1-5.
[9] Chungen Zhou;Na Wang;Zhenbo Wang.Thermal cycling life and thermal diffusivity of a plasma-sprayed nanostructured thermal barrier coating[J].Scripta materialia,200410(10):945-948.
[10] Satyajit Shukla;Sudipta Seal;Rashmi Vij;Sri Bandyopadhyay.Reduced Activation Energy for Grain Growth in Nanocrystalline Yttria-Stabilized Zirconia[J].Nano letters,20033(3):397-401.
[11] Y. Bai;Z.H. Han;H.Q. Li;C. Xu;Y.L Xu;Z. Wang;C.H. Ding;J.F. Yang.High performance nanostructured ZrO2 based thermal barrier coatings deposited by high efficiency supersonic plasma spraying[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,201116(16):7210-7216.
[12] Giallonardo, J.D.;Erb, U.;Aust, K.T.;Palumbo, G..The influence of grain size and texture on the Young's modulus of nanocrystalline nickel and nickel-iron alloys[J].Philosophical magazine: structure and properties of condensed matter,201134/36(34/36):4594-4605.
[13] JIANG Xian-liang;LIU Chun-bo;LIU Min;ZHU Hui-zhao.Influence of heat treatment on nanocrystalline zirconia powder and plasma-sprayed thermal barrier coatings[J].中国有色金属学报(英文版),2010(12):2272-2280.
[14] Fauchais, P.;Montavon, G.;Lima, R.S.;Marple, B.R..Engineering a new class of thermal spray nano-based microstructures from agglomerated nanostructured particles, suspensions and solutions: An invited review[J].Journal of Physics, D. Applied Physics: A Europhysics Journal,20119(9):093001-1-093001-53.
[15] 税毅;张鹏程;蒋驰;王术刚;肖云峰.等离子喷涂氧化锆纳米涂层的组织结构与性能[J].材料保护,2004(10):17-20.
[16] Arjun Dey;R.Uma Rani;Hari Krishna Thota.Microstructural, corrosion and nanomechanical behaviour of ceramic coatings developed on magnesium AZ31 alloy by micro arc oxidation[J].CERAMICS INTERNATIONAL,20133(3):3313-3320.
[17] Wellman RG;Tourmente H;Impey S;Nicholls JR.Nano and microhardness testing of aged EB PVD TBCs[J].Surface & Coatings Technology,20040(0):79-84.
[18] Ray, A.K.;Bose, S.C.;De, P.K.;Das, D.K..Lifetime evaluation of a thick thermal barrier coated superalloy used in turbine blade[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,201021/22(21/22):5474-5483.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%