使用往复挤压(RE)方法改善铸造和粉末冶金(PM)法制备的铝基复合材料的力学性能。分别使用AA 6063铸件和 AA 6061粉末作为基体，使用5% SiC(体积分数)颗粒作为增强相制备复合材料。挤压样品的硬度和晶粒尺寸随挤压道次的增加而降低，而韧性和延展性随挤压道次的增加而增加。由于挤压样品的拉伸强度降低，其伸长率增加。因此，往复挤压是一种改善金属基复合材料(MMC)力学性能的有效方法。
A reciprocating extrusion (RE) process was used to improve the mechanical properties of Al-based composite manufactured using cast and powder metallurgy (PM). AA 6063 cast and AA 6061 powders were used as the matrix materials, and the matrix was reinforced by 5% SiC (volume fraction) particles. The hardness and grain size of extruded samples decrease with increasing the number of extrusion pass, while the toughness and ductility increase. As the tensile strength of the samples decreases, the elongation of the extruded samples increases. Consequently, reciprocating extrusion is an effective method for improving the mechanical properties of metal matrix composites (MMC).
参考文献
| [1] | LIN Jin-bao;WANG Qu-dong;CHEN Yong-jun;LIU Man-ping;H. J. ROVEN.Microstructure and texture characteristics of ZK60 Mg alloy processed by cyclic extrusion and compression[J].中国有色金属学报（英文版）,2010(11):2081-2085. |
| [2] | M. Baki Karamis;F. Nazli Sari;Veysel Erturun.Friction and wear behaviors of reciprocatingly extruded Al-SiC composite[J].Journal of Materials Processing Technology,201212(12):2578-2585. |
| [3] | M. B. Karamis;V. Erturun;F. N. Sari.Investigation on effects of reciprocating extrusion process on microstructure of AA 6061 based composites[J].Materials Science and Technology: MST: A publication of the Institute of Metals,201212(12):1379-1384. |
| [4] | Guo XF;Remennik S;Xu CJ;Shechtman D.Development of Mg-6.0%Zn-1.0%Y-0.6%Ce-0.6%Zr magnesium alloy and its microstructural evolution during processing[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,20081/2(1/2):266-273. |
| [5] | Shih-Wei Lee;Yu-Liang Chen;Hsiao-Yun Wang;Chih-Fu Yang;Jien-Wei Yeh.On mechanical properties and superplasticity of Mg-15Al-1Zn alloys processed by reciprocating extrusion[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,20071/2(1/2):76-84. |
| [6] | GENG Lin;ZHANG Xue-nan;WANG Gui-song;ZHENG Zhen-zhu;XU Bin.Effect of aging treatment on mechanical properties of (SiCw+SiCp)/2024Al hybrid nanocomposites[J].中国有色金属学会会刊（英文版）,2006(02):387-391. |
| [7] | Yeh JW.;Peng CH.;Yuan SY..A reciprocating extrusion process for producing hypereutectic Al-20wt.% Si wrought alloys[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,19982(2):212-221. |
| [8] | M.W. Fu;Y.W.Tham;H.H. Hng;K.B. Lim.The grain refinement of A1-6061 via ECAE processing: Deformation behavior,microstructure and property[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,20091/2(1/2):84-92. |
| [9] | Martin, B;Frantisek, S;Otto, B;Requena, G.ECAP vs. direct extrusion-Techniques for consolidation of ultra-fine Al particles[J].Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing,20091/2(1/2):1-7. |
| [10] | Chou CY;Lee SL;Lin JC.Effects and deformation characteristics of cross-channel extrusion process on pure Sn and Al-7Si-0.3Mg alloy[J].Materials Chemistry and Physics,20082/3(2/3):193-199. |
| [11] | Chou CY;Lee SL;Lin JC.Effects of cross-channel extrusion on microstructure and mechanical properties of AA6061 aluminum alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,20081/2(1/2):461-467. |
| [12] | Cheng-Yu Chou;Che-Wei Hsu;Sheng-Long Lee;Kuan-Wen Wang;Jing-Chie Lin.Effects of heat treatments on AA6061 aluminum alloy deformed by cross-channel extrusion[J].Journal of Materials Processing Technology,20081/3(1/3):1-6. |
| [13] | Ayman Elsayed;Katsuyoshi Kondoh;Hisashi Imai;Junko Umeda.Microstructure and mechanical properties of hot extruded Mg-Al-Mn-Ca alloy produced by rapid solidification powder metallurgy[J].Materials & design,20105(5):2444. |
| [14] | SU Gui-hua;ZHANG Liang;CHENG Li-ren;LIU Yong-bing;CAO Zhan-yi.Microstructure and mechanical properties of Mg-6Al-0.3Mn-xY alloys prepared by casting and hot rolling[J].中国有色金属学报（英文版）,2010(03):383-389. |
| [15] | Y.Z. Du;M.Y. Zheng;C. Xu;X.G. Qiao;K. Wu;X.D. Liu;G.J. Wang;X.Y. Lv.Microstructures and mechanical properties of as-cast and as-extruded Mg-4.50Zn-1.13Ca (wt%) alloys[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2013:6-13. |
| [16] | Gencaga Purcek;Onur Saray;Ibrahim Karaman.Effect of severe plastic deformation on tensile properties and impact toughness of two-phase Zn-40Al alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,20081/2(1/2):403-410. |
| [17] | Dawei Ji;Churning Liu;Liechong Tang;Yingchun Wan;Cen Huang.Microstructures and mechanical properties of a hot extruded Mg-4.45Zn-0.46Y-0.76Zr alloy plate[J].Materials & design,2014Jan.(Jan.):602-610. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%