欢迎登录材料期刊网

材料期刊网

高级检索

The microstructure evolution of as-rolled Ti-45Al-9Nb-0.3Y alloy as well as the nanohardness ofβ/B2 matrix was investigated by means of scanning electron microscopy (SEM) in backscattered electron mode (BSE) mode, transmission electron microscopy (TEM) and nanoindentation. This high Nb containing TiAl based alloy was rolled with 50%, 60%, 65% reduction, respectively. Omega phase precipitated in B2 phase with an orientation relationship of {110}β//{1120}ω and <111>β//<0001>ω. Moreover, with the increase of de-formation reduction, rod-like structure which was formed inγ grain transformed from (α2+γ) lamellae structure intoα2 phase only. Addi-tionally, nanoinentation experiment revealed that the precipitation hardening ofω phase increased the hardness ofβ/B2 phase.

参考文献

[1] Li Wang;Yong Liu;Wei Zhang.Optimization of pack parameters for hot deformation of TiAl alloys[J].Intermetallics,20111(1):68-74.
[2] Li Baohui;Kong Fantao;Chen Yuyong.Effect of Yttrium Addition on Microstructures and Room Temperature Tensile Properties of Ti-47A1 Alloy[J].Journal of Rare Earths,20063(3):352-356.
[3] L.L. Xiang;L.L. Zhao;Y.L Wang.Synergistic effect of Y and Nb on the high temperature oxidation resistance of high Nb containing TiAl alloys[J].Intermetallics,2012:6-13.
[4] X.F. Ding;J.P. Lin;L.Q. Zhang.Lamellar orientation control in a Ti-46Al-5Nb alloy by directional solidification[J].Scripta materialia,20111(1):61-64.
[5] H. Clemens;H.F. Chladil;W. Wallgram.In and ex situ investigations of the beta-phase in a Nb and Mo containing gamma-TiAl based alloy[J].Intermetallics,20086(6):827-833.
[6] R. Gerling;F.P. Schimansky;A. Stark.Microstructure and mechanical properties of Ti 45Al 5Nb + (0-0.5C) sheets[J].Intermetallics,20085(5):689-697.
[7] Z.W. Huang;D.G. Zhu.Thermal stability of Ti-44Al-8Nb-lB alloy[J].Intermetallics,20082(2):156-167.
[8] Andreas Stark;Arno Bartels;Helmut Clemens;Frank-Peter Schimansky.On the Formation of Ordered ω-phase in High Nb Containing γ-TiAl Based Alloys[J].Advanced Engineering Materials,200810(10):929-934.
[9] Z.W. Huang.Ordered omega phases in a 4Zr-4Nb-containing TiAl-based alloy[J].Acta materialia,20088(8):1689-1700.
[10] S.Z. Zhang;F.T. Kong;Y.Y. Chen.Phase transformation and microstructure evolution of differently processed Ti-45Al-9Nb-Y alloy[J].Intermetallics,2012:208-216.
[11] B. Liu;Y. Liu;W. Zhang.Hot deformation behavior of TiAl alloys prepared by blended elemental powders[J].Intermetallics,20112(2):154-159.
[12] S. LI;X. SU;Y. HAN.Simulation of hot deformation of TiAl based alloy containing high Nb[J].Intermetallics,20053/4(3/4):323-328.
[13] Kong Fantao;Chen Ziyong;Tian Jing.Effect of Rare Earth on Microstructure of gamma-TiAl Intermetallics[J].Journal of Rare Earths,20032(2):163-166.
[14] S. Bystrzanowski;A. Bartels;A. Stark.Evolution of microstructure and texture in Ti-46Al-9Nb sheet material during tensile flow at elevated temperatures[J].Intermetallics,20105(5):1046-1055.
[15] S. Bystrzanowski;A. Bartels;H. Clemens.Characteristics of the tensile flow behavior of Ti-46Al-9Nb sheet material - Analysis of thermally activated processes of plastic deformation[J].Intermetallics,20085(5):717-726.
[16] Liu, Bin;Liu, Yong;Huang, Lan;Li, Huizhong;He, Yuehui.Characterization of phase transformation during hot compressive deformation in a beta-stabilized Ti-45Al-7Nb-0.4W-0.15B alloy[J].Materials Characterization,2015:113-117.
[17] Birgit Skrotzki;Thorsten Rudolf;Antonin Dlouhy;Gunther Eggeler.Microstructural evidence for dynamic recrystallization during creep of a duplex near-γ TiAl-alloy[J].Scripta materialia,199811(11):1545-1551.
[18] W.-J.Zhang;U.Lorenz.Recovery, recrystallization and phase transformations during thermomechanical processing and treatment of TiAl- Based alloys[J].Acta materialia,200011(11):2803-2813.
[19] T. T. Cheng.The decomposition of the beta phase in Ti-44Al-8Nb and Ti-44Al-4Nb-4Zr-0.2Si alloys[J].Acta materialia,199813(13):4801-4810.
[20] Z. W. Huang;W. Voice;P. Bowen.Thermal exposure induced α_2 + γ → B2(ω) and α_2 → B2(ω) phase transformations in a high Nb fully lamellar TiAl alloy[J].Scripta materialia,20031(1):79-84.
[21] T.T. Cheng;M.R. Willis.Effect of major alloying additions on the microstructure and mechanical properties of γ-TiAl[J].Intermetallics,19991(1):89-99.
[22] Wang, G.;Xu, L.;Tian, Y.;Zheng, Z.;Cui, Y.;Yang, R..Flow behavior and microstructure evolution of a P/M TiAl alloy during high temperature deformation[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,201122(22):6754-6763.
[23] .Z. Niu;Y.Y. Chen;S.L Xiao.Microstructure evolution and mechanical properties of a novel beta γ-TiAl alloy[J].Intermetallics,2012:225-231.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%