The effects of Sm additions (0, 0.5 wt.%, 1.0 wt.%and 1.5 wt.%) on the eutectic Si and β-Al5FeSi phases of ADC12 as-cast alloys were studied by optical microscopy (OM), scanning electron microscopy (SEM) and differential thermal analysis (DTA). The experimental results showed that Sm was an effective modifying agent for the eutectic Si of ADC12 alloy, when 1.0 wt.%-1.5 wt.%Sm was added to the alloy, the coarse acicular eutectic Si was modified into fine particle or short rod structure. Moreover, the appropriate addition of Sm (about 1.0 wt.%) had marked effects on shortening the length of needle-likeβ-Al5FeSi phase. Whereas, Sm was less effective on modifying the needle-likeβ-iron to the Chinese script or sphericalα-iron phase. The modification mecha-nism was also discussed.
参考文献
| [1] | Okayasu, M.;Ohkura, Y.;Takeuchi, S.;Takasu, S.;Ohfuji, H.;Shiraishi, T..A study of the mechanical properties of an Al-Si-Cu alloy (ADC12) produced by various casting processes[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2012:185-192. |
| [2] | Hu X W;Jiang F G;Ai F R;Yan H .Effects of rare earth Er additions on microstructure development and mechani-cal properties of die-cast ADC12 aluminum alloy[J].J Al-loys Compd,2012,538:21. |
| [3] | Mohamed A M A;Samuel A M;Samuel F H;Doty H W .Influence of additives on the microstructure and tensile properties of near-eutectic Al-10.8%Si cast alloy[J].Materials & Design,2009,30:3943. |
| [4] | Shin, S.-S.;Kim, E.-S.;Yeom, G.-Y.;Lee, J.-C..Modification effect of Sr on the microstructures and mechanical properties of Al-10.5Si-2.0Cu recycled alloy for die casting[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2012:151-157. |
| [5] | Liao HC.;Sun Y.;Sun GX. .Correlation between mechanical properties and amount of dendritic alpha-Al phase in as-cast near-eutectic Al-11.6% Si alloys modified with strontium[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2002(1/2):62-66. |
| [6] | Farahany, S.;Ourdjini, A.;Idrsi, M.H.;Shabestari, S.G..Evaluation of the effect of Bi, Sb, Sr and cooling condition on eutectic phases in an Al-Si-Cu alloy (ADC12) by in situ thermal analysis[J].Thermochimica Acta: An International Journal Concerned with the Broader Aspects of Thermochemistry and Its Applications to Chemical Problems,2013:59-68. |
| [7] | Elsebaie, O.;Samuel, A.M.;Samuel, F.H. .Effects of Sr-modification, iron-based intermetallics and aging treatment on the impact toughness of 356 Al-Si-Mg alloy[J].Journal of Materials Science,2011(9):3027-3045. |
| [8] | XING Pengfei,GAO Bo,ZHUANG Yanxin,LIU Kaihua,TU Ganfeng.Effect of erbium on properties and microstructure of Al-Si eutectic alloy[J].稀土学报（英文版）,2010(06):927-930. |
| [9] | Huang X;Yan H .Effect of trace La addition on the micro-structures and mechanical property of as-cast ADC12 Al-alloy[J].J Wuhan Univ Technol -Mater Sci,2013,28:202. |
| [10] | J.S. Luna A,A. Flores V,R. Mu(n)iz V,A.F. Fuentes,J. Torres,N. Rodríuez R,J.C. Ortiz,P.Orozco.Cerium extraction by metallothermic reduction using cerium oxide powder injection[J].稀土学报（英文版）,2011(01):74-76. |
| [11] | Kang H S;Yoon W Y;Kim K H;Kim M H, Yoon Y P, Cho I S .Effective parameter for the selection of modifying agent for Al-Si alloy[J].Materials Science and Engineering A,2007,449-451:334. |
| [12] | Nogita K;McDonald S D;Dahle A K .Eutectic modifica-tion of Al-Si alloys with rare earth metals[J].Materials Transactions,2004,45(02):323. |
| [13] | Witthaya Eidhed.Modification of β-Al5FeSi Compound in Recycled Al-Si-Fe Cast Alloy by Using Sr, Mg and Cr Additions[J].材料科学技术学报（英文版）,2008(01):45-47. |
| [14] | P. Ashtari;H. Tezuka;T. Sato .Influence of Li addition on intermetallic compound morphologies in Al-Si-Cu-Fe cast alloys[J].Scripta materialia,2004(1):43-46. |
| [15] | Qiu H X;Yan H;Hu Z .Effect of samarium (Sm) addition on the microstructures and mechanical properties of Al-7Si-0.7Mg alloys[J].Journal of Alloys and Compounds,2013,567:81. |
| [16] | Nogita K;Yasuda H;Yoshiya M;McDonald S D, Uesugi K,Takeuchi A,Suzuki Y .The role of trace element seg-regation in the eutectic modification of hypoeutectic Al-Si alloys[J].Journal of Alloys and Compounds,2010,489:415. |
| [17] | Lu S Z;Hellawell A .The mechanism of silicon modifica-tion in aluminum-silicon alloys impurity induced twinning[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1987,18:1721. |
| [18] | Samuel F H;Samuel A M;Liu H .Effect of magnesium content on the ageing behavior of water-chilled Al-Si-Cu-Mg-Fe-Mn (380) alloy castings[J].Journal of Materials Science,1995,30:2534. |
| [19] | Ashtari P;Tezuka H;Sato T .Modification of Fe-contain-ing intermetallic compounds by K addition to Fe-rich AA319 aluminum alloys[J].Scripta Materialia,2005,53:942. |
| [20] | Lu L;Dahle A K .Iron-rich intermetallic phases and their role in casting defect formation in hypoeutectic Al-Si al-loys[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,2005,36:819. |
| [21] | Saccone A;Cacciamani G;Maccio D;Borzone G Ferro R .Contribution to the study of the alloys and intermetallic compounds of aluminium with the rare-earth metals[J].In-termetallics,1998,6:208. |
| [22] | Cao X;Campbell J .The nucleation of Fe-rich phases on oxide films in Al-11.5Si-0.4Mg cast alloys[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,2003,34:1409. |
| [23] | Zahedi H;Emamy M;Razaghian A;Mahta M, Campbell J, Tiryakioglu M .The effect of Fe-rich intermetallics on the weibull distribution of tensile properties in a cast Al-5 Pct Si-3 Pct Cu-1 Pct Fe-0.3 Pct Mg alloy[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,2007,38:659. |
| [24] | Samuel AM.;Doty HW.;Samuel FH. .OBSERVATIONS ON THE FORMATION OF BETA-AL5FESI PHASE IN 319 TYPE AL-SI ALLOYS[J].Journal of Materials Science,1996(20):5529-5539. |
| [25] | 饶远生,闫洪,胡志.Sm对ADC12合金微观组织与力学性能的影响[J].特种铸造及有色合金,2012(10):965-969. |
| [26] | Wang, J.;Wu, Y.;Wang, L. .Effects of samarium on microstructures and tensile properties of Mg-5Al-0.3Mn alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2011(12):4115-4119. |
| [27] | Jia B R;Liu L B;Yi D Q;Jin Z P, Nie J F .Thermody-namic assessment of the Al-Mg-Sm system[J].Journal of Alloys and Compounds,2008,459:267. |
| [28] | Hosseinifar M;Malakhov D V .The sequence of intermet-allics formation during the solidification of an Al-Mg-Si alloy containing La[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,2011,42:825. |
| [29] | Yi H K;Zhang D;Sakata T;Mori H .Microstructures and La-rich compounds in a Cu-containing hypereutectic Al-Si alloy[J].Journal of Alloys and Compounds,2003,354:159. |
| [30] | Pekguleryuz M O;Kaya A A .Creep resistant magnesium alloys for power train applications[J].Advanced Engineering Materials,2003,5:870. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%