A novel method for the preparation of single-phase ammonium dimolybdate with industrial ammonium molybdate was studied.Various influential factors were evaluated in the paper,including reaction temperature,reaction time,initial molybdenum concentration,initial NH3/Mo molar ratio,and stirring speed.Under the optimum experimental conditions,the crystallization rate of product is 85.23％.The X-ray diffraction (XRD) analysis and chemical analysis show that the product is single-phase ammonium dimolybdate,and no impurity phases exist.The scanning electronic microscope (SEM) image reveals uniform particle size,good particle dispersion,and no agglomeration between particles.Meanwhile,the final pH value of acidification was investigated.The total molybdenum recovery can reach up to 99.40％,and the main phases of acidification product are the same as those of raw material with the final pH value of 1.5.This determines that the acidification product can be used as a raw material to produce single-phase ammonium dimolybdate.
参考文献
| [1] | S. Primig;H. Leitner;H. Clemens .On the recrystallization behavior of technically pure molybdenum[J].International Journal of Refractory Metals & Hard Materials,2010(6):703-708. |
| [2] | Q. Abbas;L. Binder .The electrochemical dissolution of molybdenum in non-aqueous media[J].International Journal of Refractory Metals & Hard Materials,2011(4):542-546. |
| [3] | Tan W;Guo M.X;Cao L.F;Shen K and Wang M.P .The annealing characteristics of pure molybdenum bars manufactured by a modified technique[J].Journal of Alloys and Compounds,2008,462(1-2):386. |
| [4] | R. Ohser-Wiedemann;U. Martin;H.J. Seifert .Densification behaviour of pure molybdenum powder by spark plasma sintering[J].International Journal of Refractory Metals & Hard Materials,2010(4):550-557. |
| [5] | AN Geng,LIU Gaojie.Preparation of ultramicro molybdenum carbide powders and study on wear properties of their coating[J].稀有金属（英文版）,2011(03):262-266. |
| [6] | WANG Xingqing,HE Xiaoxiang,GUO Hailiang.Influence of Mo on the microstructure and mechanical properties of TiC-based cermets[J].稀有金属（英文版）,2010(04):346-350. |
| [7] | SONG Xiu,WANG Lei,LIU Yang,MA Huiping.Precipitation characteristics and La effects on precipitates of a new 22Cr-14W-2Mo superalloy[J].稀有金属(英文版),2010(02):132-137. |
| [8] | Sun YJ;Xie H;Sun J .Influence of ammonium molybdate precursor on Mo powder preparation and working properties[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2008(0):168-171. |
| [9] | Mendenhall R.G;Chereslowsky M.J;Scheftic J.L .Method for Producing Fine Size Yellow Molybdenum Trioxide Powder[P].United States Patent,5185133,1993. |
| [10] | Tuominen S.M .Preparation and sintering of fine molybdenum powder[J].Powder Technology,1981,30(01):73. |
| [11] | Khachatur Manukyan;Davit Davtyan;Jorg Bossert .Direct reduction of ammonium molybdate to elemental molybdenum by combustion reaction[J].Chemical engineering journal,2011(2):925-930. |
| [12] | 李卫昌.规则大晶体二钼酸铵的生产实践[J].中国有色冶金,2007(04):40-41,48. |
| [13] | 李峰.高溶性二钼酸铵生产工艺[J].山西化工,2007(05):41-43. |
| [14] | 李晓文,考艳,杨万军.改造传统设备,提高二钼酸铵、七钼酸铵产品质量[J].中国钼业,2006(06):26-28. |
| [15] | Xiang T.G.Molybdenum Metallurgy[M].长沙:中南大学出版社,2002:127. |
| [16] | 王志诚.用四钼酸铵生产试剂级七钼酸铵的工艺研究与实践[J].中国钼业,2000(05):27-29. |
| [17] | Zhang Q.X;Zhao Q.S.Tungsten Molybdenum Metallurgy[M].北京:冶金工业出版社,2005:208. |
| [18] | Li H.G.Rare Refractory Metal(Ⅰ)[M].北京:冶金工业出版社,1999:267. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%