Mechanical properties and expansion coefficient of Mo-Cu composites with different Ni contents

稀有金属（英文版）, 2012, 31(4): 368-371. doi: 10.1007/s12598-012-0522-7

^1, , ^2, , ^3, , ^4,

1.College of Electromechanical Engineering,Hunan University of Science and Technology,Xiangtan 411201,China

2.College of Electromechanical Engineering,Hunan University of Science and Technology,Xiangtan 411201,China

3.College of Electromechanical Engineering,Hunan University of Science and Technology,Xiangtan 411201,China

4.School of Materials Science and Engineering,University of Science and Technology Beijing,Beijing 100083,China

基金项目: This work was financially supported by the Program of the Department of Education of Hunan Province,China(08C331)

Mechanical properties and expansion coefficient of Mo-Cu composites with different Ni contents

GUO Shibo ^1, , KANG Qiping ^2, , CAI Chunbo ^3, , Qu Xuanhui ^4,

1.College of Electromechanical Engineering,Hunan University of Science and Technology,Xiangtan 411201,China

2.College of Electromechanical Engineering,Hunan University of Science and Technology,Xiangtan 411201,China

3.College of Electromechanical Engineering,Hunan University of Science and Technology,Xiangtan 411201,China

4.School of Materials Science and Engineering,University of Science and Technology Beijing,Beijing 100083,China

Keywords： Mo-Cu alloy

Mo-Cu composites were fabricated by powder metallurgy with addition of various Ni contents.The effect of Ni contents on mechanical and thermal properties of Mo-Cu composites was investigated.The results show that mechanical and thermal properties of Mo-Cu composites are greatly affected by the addition of Ni contents.The composite powders with Ni addition exhibits high sinterability.The sintering temperature is greatly decreased and the comprehensive properties of Mo-Cu composites are obviously improved.Mo-Cu composites with a content of 1.5 wt.％ Ni have relative density 99.2％,bending strength 1057.9 MPa,hardness 72.5 HRA,electronic resistivity 1.28× 10 -7Ω.m-1,thermal conductivity 139 W·m-1·K-1,and lower coefficient of thermal expansion 7.4×10-6 K 1.Mo-Cu composites have homogeneous and fine microstructure.The fracture mechanism is ductile fracture.

参考文献

[1]	German R.M;Hons K.F;Johnson J.L .Powder metallurgy processing of thermal management materials for microelectronic applications[J].Powder Metallurgy,1994,30(02):205.
[2]	Johnson J.L;German R.M .Processing of Mo-Cu for thermal management applications[J].International Journal of Powder Metallurgy,1999,35(08):39.
[3]	牟科强,邝用庚.Mo-Cu材料的性能和应用[J].金属功能材料,2002(03):26-29.
[4]	He Z.Research on preparation of Mo/Cu compounds[J].Electric Alloys,2002(02):4.
[5]	刘海彦,李增峰,汤慧萍,高广瑞,黄原平.机械合金化制备钼铜复合材料[J].功能材料,2004(z1):3294-3296.
[6]	张德尧,吴晓惠.Mo-Cu材料的制作[J].中国钼业,2001(04):38-39,53.
[7]	陈文革.熔渗法制备Mo/Cu系梯度功能材料的研究[J].有色金属,2002(02):12-15.
[8]	Nan H;Qu X.H;Fang Y.C .Powder injection molding of Mo/Cu alloy for electronic packaging[J].Powder Metallurgy Industry,2004,14(06):1.
[9]	何平,王志法,肖迎红.烧结温度对Mo-Cu-Ni合金性能的影响[J].中国钼业,2004(05):32-34.
[10]	周贤良,饶有海,华小珍,张建云,邹爱华.机械合金化对Mo-Cu合金性能的影响[J].粉末冶金技术,2007(01):21-23.
[11]	郭世柏,康启平.机械合金化制备Mo-Cu复合材料的研究[J].矿冶工程,2009(04):92-94.
[12]	Liu X.F .The connection technology of Mo-Cu alloy with 95％ alumina[J].Vacuum Electronics Technology,2001,5(02):50.
[13]	韩胜利,宋月清,崔舜,夏扬,周增林,李明.MO-Cu合金的开发和研究进展[J].粉末冶金工业,2007(05):40-45.
[14]	夏扬,宋月清,崔舜,林晨光,韩胜利.Mo-Cu和W-Cu合金的制备及性能特点[J].稀有金属,2008(02):240-244.
[15]	Shin J.H;Wang Q.M;Kim K.H .Microstructural evolution and tribological behavior of Mo-Cu-N coatings as a function of Cu content[J].Materials Chemistry and Physics,2011,130(03):870.

上一张下一张

计量

下载量()
访问量()

作者相关

在本站搜索
在百度学术搜索
在万方数据库搜索
在CNKI搜索

文章评分

您的评分：
1

0%
2

0%
3

0%
4

0%
5

0%

材料期刊网

Mechanical properties and expansion coefficient of Mo-Cu composites with different Ni contents

参考文献