Cylindrical components of in situ functionally gradient composite materials of Al-19Si-5Mg alloy were manufactured by centrifugal casting. Microstructure characteristics of the manufactured components were observed and the effects of the used process factors on these character-istics were analyzed. The results of observations shows that, in thickness, the components possess microstructures accumulating lots of Mg2Si particles and a portion of primary silicon particles in the inner layer, a little Mg2Si and primary silicon particles in the outer layer, and without any Mg2Si and primary silicon particle in the middle layer. The results of the analysis indicate that the rotation rate of centrifugal casting, mould temperature, and melt pouring temperature have evidently affected the accumulation of the second phase particles. Also, the higher the centrifugal rotation rate, mould temperature, and melt pouring temperature are, the more evident in the inner layer the degree of accumulation of Mg2Si and primary silicon particles is.
参考文献
| [1] | Wu S S;Tu X L;Wu G Z .Effect of cooling rate on refining of primary silicon of hypereutectic Al-Si alloy[J].Journal of Materials Science and Technology,2001,9(02):141. |
| [2] | wang Qudong;Jin Junze .In situ gradient double-layer composites of Al-Fe alloy by centrifugal casting[J].Transactions of Nonferrous Metals Society of China,1997(1):125-130. |
| [3] | Hernandez FCR;Djurdjevic MB;Kierkus WT;Sokolowski JH .Calculation of the liquidus temperature for hypo and hypereutectic aluminum silicon alloys[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2005(1/2):271-276. |
| [4] | C.G. Kang;S.W. Youn;P.K. Seo .Data base construction on mechanical properties of thixoforged aluminum parts and their microstructure evaluation[J].Journal of Materials Processing Technology,2005(3):330-337. |
| [5] | Dehong Lu;Yehua Jiang;Guisheng Guan;Rongfeng Zhou;Zhenhua Li;Rong Zhou .Refinement of primary Si in hypereutectic Al-Si alloy by electromagnetic stirring[J].Journal of Materials Processing Technology,2007(1/3):13-18. |
| [6] | Spigarelli S;Evangelista E;Cucchier S.Analysis of the creep response of an Al-17Si-4Cu-0.55Mg alloy[A].Budapost,2004:702. |
| [7] | 李克,王俊,周鸣,张雪萍,孙宝德,周尧和.过共晶铝硅自生梯度复合材料的组织与性能[J].中国有色金属学报,2002(03):521-524. |
| [8] | M. MABUCHI;K. HIGASHI .STRENGTHENING MECHANISMS OF Mg-Si ALLOYS[J].Acta materialia,1996(11):4611-4618. |
| [9] | Zhang J;Fan Z;Wang Y Q;Zhou B.L .Microstructural development of Al-15wt.% Mg2Si in situ composite with mischmetal addition[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2000,281(1-2):104. |
| [10] | Zhang J.;Zhou BL.;Wu XQ.;Wang YQ. .Functionally graded Al/Mg2Si in-situ composites, prepared by centrifugal casting[J].Journal of Materials Science Letters,1998(19):1677-1679. |
| [11] | Wang Q D;Ding W J;Jin J Z .In situ surface composites fabricated by centrifugally casting hyperentectic Al-Si alloy[J].Acta Mater Compos Sin,1998,15(03):7. |
| [12] | Wang Q D;Ding W J;Jin J Z .The step growth of primary silicon observed by decantation during centrifugal casting[J].Journal of Materials Science and Technology,1999,15(08):921. |
| [13] | 唐多光,毛协民,张金龙,徐张翼,沈友良.一种过共晶铝硅合金的绿色长效变质剂[J].铸造,2002(10):652-653. |
| [14] | 许春香,张金山.REAlTiBP多元复合变质ZL117铝硅合金[J].中国稀土学报,2002(04):331-333. |
| [15] | Zhang B M.Centrifugal Casting[M].Machinery Industry Press,Beijing,2006 |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%