武汉理工大学学报-材料科学版(英文版), 2015, (4): 829-832. doi: 10.1007/s11595-015-1234-2
HU Haijiang 1, , XU Guang 2, , ZHANG Yulong 3, , 李慧改","id":"ef9d285c-3b87-4518-87b7-8179daa62793","originalAuthorName":"李慧改"},{"authorName":"翟启杰","id":"614cf35c-d49a-499b-890f-5523323c8374","originalAuthorName":"翟启杰"}],"categoryName":"|","doi":"","fpage":"595","id":"44172190-645a-4b35-8a53-6e88bd91551b","issue":"6","journal":{"abbrevTitle":"JSXB","coverImgSrc":"journal/img/cover/JSXB.jpg","id":"48","issnPpub":"0412-1961","publisherId":"JSXB","title":"金属学报"},"keywords":[{"id":"f17c4375-eeeb-47a0-bfa4-4a39c822c3ce","keyword":"单向凝固","originalKeyword":"单向凝固"},{"id":"ccc2664a-001a-4a09-8468-8fdcbc75daae","keyword":"superfine inclusion of Ti-O","originalKeyword":"superfine inclusion of Ti-O"},{"id":"70eda2de-a8f9-43cd-9342-34d4897a75c1","keyword":"cooling rate","originalKeyword":"cooling rate"},{"id":"9d333775-6ff0-4ac2-bfe5-afb71f4c99ee","keyword":"coupled model","originalKeyword":"coupled model"}],"language":"zh","publisherId":"0412-1961_2007_6_9","title":"定向凝固冷速对Ti-O超细夹杂物析出的影响","volume":"43","year":"2007"},{"abstractinfo":"小样电解法可以无损伤地提取钢中细小以及不稳定的非金属夹杂物,相比大样电解,小样电解所需时间短、操作简单.通过分析水溶液小样电解法提取超细夹杂物的影响因素,研究了电解液成分以及电解时间对电解效率的影响,利用水溶液电解法提取出了包括氧化物、硫化物等类型的超细夹杂物.为深入研究细小夹杂物的三维形貌、粒度分布及其化学成分等提供基础依据.","authors":[{"authorName":"李慧改","id":"dd8fc3ac-517d-44f7-98d5-54d563af22f2","originalAuthorName":"李慧改"},{"authorName":"邱磊","id":"65b6a38c-3a5d-4e3e-b960-2c387d94bc8b","originalAuthorName":"邱磊"},{"authorName":"吴春峰","id":"887bae5e-6eab-4deb-9cf4-cf48267329ed","originalAuthorName":"吴春峰"},{"authorName":"曲巍","id":"b367ad28-e888-4681-8dc7-4e6533885ba0","originalAuthorName":"曲巍"},{"authorName":"郑少波","id":"13cb3efa-8eb9-4cd6-b6ae-98c5e11838da","originalAuthorName":"郑少波"}],"doi":"10.3969/j.issn.1001-7208.2010.06.010","fpage":"39","id":"5a9a9cf1-a467-4230-94f1-46a3a19395bb","issue":"6","journal":{"abbrevTitle":"SHJS","coverImgSrc":"journal/img/cover/SHJS.jpg","id":"59","issnPpub":"1001-7208","publisherId":"SHJS","title":"上海金属"},"keywords":[{"id":"760d31d4-e5dd-4371-bcf1-33da3af33538","keyword":"钢","originalKeyword":"钢"},{"id":"cbb76e67-b0c3-4756-9896-3b202447006f","keyword":"超细","originalKeyword":"超细"},{"id":"659b83ea-af74-403f-8bd2-67a7b4ef0baf","keyword":"非金属夹杂物","originalKeyword":"非金属夹杂物"},{"id":"2c6ecf2f-2f4a-413b-82bf-e80d0695f4aa","keyword":"水溶液电解","originalKeyword":"水溶液电解"}],"language":"zh","publisherId":"shjs201006010","title":"水溶液电解法提取钢中超细非金属夹杂物研究","volume":"32","year":"2010"},{"abstractinfo":"对Ni2Cr合金在不同环境气氛及动态渗氢中的脆化进行了系统研究,并从能量学方面分析了影响合金脆化的因素.结果表明,Ni2Cr合金在室温空气及氢气中不存在明显的环境氢脆,动态渗氢拉伸时Ni2Cr合金存在严重的氢脆敏感性,无序和高度有序合金脆化严重,部分有序合金氢脆敏感性较小.","authors":[{"authorName":"李慧改","id":"341b5771-fe3e-431c-887e-c74f10b951da","originalAuthorName":"李慧改"},{"authorName":"程晓英","id":"242ff2ff-0959-4957-b771-7b943de4a967","originalAuthorName":"程晓英"}],"doi":"10.3969/j.issn.1001-7208.2004.05.003","fpage":"10","id":"6b4d1859-52da-4b84-841e-5799c9e92f9d","issue":"5","journal":{"abbrevTitle":"SHJS","coverImgSrc":"journal/img/cover/SHJS.jpg","id":"59","issnPpub":"1001-7208","publisherId":"SHJS","title":"上海金属"},"keywords":[{"id":"6cb0a411-4302-4dea-b02d-5f57ce4f5e4d","keyword":"Ni2Cr合金","originalKeyword":"Ni2Cr合金"},{"id":"77c33ef0-9ac8-4122-b3fb-259ec320e5f4","keyword":"环境氢脆","originalKeyword":"环境氢脆"},{"id":"b19d373f-4a0a-4848-be5b-a4f2f8f8acb8","keyword":"动态渗氢","originalKeyword":"动态渗氢"}],"language":"zh","publisherId":"shjs200405003","title":"Ni2Cr合金室温环境氢脆的研究","volume":"26","year":"2004"},{"abstractinfo":"通过金相、扫描电镜及能谱等检测手段,对中空钢22CrNi3Mo连铸坯断面非金属夹杂物的尺寸、数量、分布、形貌以及成分等进行了检测和分析.结果表明:夹杂物主要集中在边部;距内弧1/4处夹杂物有聚集现象.夹杂物主要为硫化锰,其次为复合脱氧产物铝硅酸盐,以及球状铝酸盐或含镁铝硅酸盐.","authors":[{"authorName":"王光远","id":"c89f3d81-f9b8-4a29-96a5-c135646fbdef","originalAuthorName":"王光远"},{"authorName":"杨接明","id":"2ab2f920-0ee4-47b3-83b7-30089238e401","originalAuthorName":"杨接明"},{"authorName":"李慧改","id":"68c35980-67a4-4738-9e64-2cde50044840","originalAuthorName":"李慧改"},{"authorName":"孙菲菲","id":"9fe4f6b6-045f-4f52-9db4-4595fdc60663","originalAuthorName":"孙菲菲"},{"authorName":"蔡传杰","id":"f1da37d2-0a58-48d7-918e-f000dfd26371","originalAuthorName":"蔡传杰"},{"authorName":"郑少波","id":"b71c50ca-cee9-4026-bf8a-452044fd273e","originalAuthorName":"郑少波"}],"doi":"","fpage":"40","id":"6be21834-42a6-43f1-8457-ec92bee4fdfc","issue":"5","journal":{"abbrevTitle":"SHJS","coverImgSrc":"journal/img/cover/SHJS.jpg","id":"59","issnPpub":"1001-7208","publisherId":"SHJS","title":"上海金属"},"keywords":[{"id":"2b78505d-8a06-41bd-97f8-f3db91cbbb33","keyword":"中空钢","originalKeyword":"中空钢"},{"id":"f9782ec2-2418-4ef1-8d41-f7ae76a9de48","keyword":"连铸坯","originalKeyword":"连铸坯"},{"id":"972c507b-3873-40cb-92b4-fd63d8c959a7","keyword":"洁净度","originalKeyword":"洁净度"},{"id":"d0289714-31ec-4f01-8e0e-04e6883f8025","keyword":"夹杂物","originalKeyword":"夹杂物"}],"language":"zh","publisherId":"shjs201305010","title":"中空钻探钢22CrNi3Mo连铸坯断面夹杂物的研究","volume":"35","year":"2013"},{"abstractinfo":"通过300kg级氢-碳熔融还原热模拟试验,从热力学角度分析了氢-碳混合熔融还原条件下磷的分配比,运用熔渣规则溶液模型计算了氧化钙、二氧化硅、氧化镁、氧化铝、氧化亚铁、五氧化二磷六元熔渣组分的活度、活度系数,进而计算出一定温度条件下熔渣的磷容量以及渣金平衡时磷分配比的理论值。通过比较理论计算得出的磷分配比与试验中磷的分配比的差异,解析产生差异的原因,进而为氢-碳混合熔融还原炼铁新工艺冶炼高磷铁矿提供参数。试验结果表明:用熔渣规则溶液模型计算渣金间的磷的分配比是合适的,氢-碳熔融还原工艺可以利用高磷铁矿。","authors":[{"authorName":"周林","id":"17d06d49-b81b-48cd-b42a-e09ff2566c7a","originalAuthorName":"周林"},{"authorName":"郑少波","id":"12a27fa5-775b-4047-b952-1f0cdc555002","originalAuthorName":"郑少波"},{"authorName":"孙克强","id":"28927aa0-19ec-4b51-9148-c74aba789a87","originalAuthorName":"孙克强"},{"authorName":"李慧改","id":"b0a49547-48d7-4512-ae97-b655c32656ce","originalAuthorName":"李慧改"},{"authorName":"王东彦","id":"b673541e-b8a1-4d60-87bf-e61bba544359","originalAuthorName":"王东彦"}],"doi":"","fpage":"15","id":"7ed2a85c-2fde-4b0b-93df-1a0434baa700","issue":"1","journal":{"abbrevTitle":"GTYJXB","coverImgSrc":"journal/img/cover/GTYJXB.jpg","id":"30","issnPpub":"1001-0963","publisherId":"GTYJXB","title":"钢铁研究学报"},"keywords":[{"id":"136c75f7-12a3-414c-856a-275575305bcb","keyword":"H2-C熔融还原","originalKeyword":"H2-C熔融还原"},{"id":"b11a1779-bd6a-4904-9ae0-e50a520a9078","keyword":"磷容量","originalKeyword":"磷容量"},{"id":"648702f9-ef11-42a5-948b-92945c56effd","keyword":"磷分配比","originalKeyword":"磷分配比"},{"id":"0e7a6568-d9a2-476d-b72c-563a2368e5b5","keyword":"熔渣规则溶液模型","originalKeyword":"熔渣规则溶液模型"}],"language":"zh","publisherId":"gtyjxb201201004","title":"H_2-C熔融还原条件下渣金间磷的分配比的试验研究","volume":"24","year":"2012"},{"abstractinfo":"微量镁在轴承钢中偏聚是改善碳化物的关键,通过理论分析发现轴承钢退火时能够使镁产生较大的偏聚,偏聚系数可观;检测证明适当提高钢中镁含量可改变碳化物相形态及成分;镁是在碳化物相中产生较大的弹性畸变后来达到球化碳化物的效果的.","authors":[{"authorName":"刘军","id":"3f9ba18c-e80c-44c1-95e8-35cccc450f80","originalAuthorName":"刘军"},{"authorName":"陆青林","id":"372a310a-d399-467a-9b35-91c98b0256f0","originalAuthorName":"陆青林"},{"authorName":"李铮","id":"792bb2f0-0956-49b4-aaa8-5e626c26b9c4","originalAuthorName":"李铮"},{"authorName":"郑少波","id":"a00ce557-a150-4f8a-af1c-6ceb785d5dcc","originalAuthorName":"郑少波"},{"authorName":"李慧改","id":"31fb3943-c693-4fc4-bc79-88dcf7460730","originalAuthorName":"李慧改"}],"doi":"","fpage":"39","id":"95d705e2-4c9f-475e-b081-ec00f76f39ce","issue":"5","journal":{"abbrevTitle":"GTYJXB","coverImgSrc":"journal/img/cover/GTYJXB.jpg","id":"30","issnPpub":"1001-0963","publisherId":"GTYJXB","title":"钢铁研究学报"},"keywords":[{"id":"f42ef701-fd6c-46eb-8659-8e8ba6f578cb","keyword":"镁","originalKeyword":"镁"},{"id":"00374781-a8ab-43d7-bb63-ae103b09ca68","keyword":"偏聚","originalKeyword":"偏聚"},{"id":"3a781874-b304-417b-b7d3-4fef9b4bd08d","keyword":"碳化物","originalKeyword":"碳化物"},{"id":"31fb3350-11d9-4901-a9c1-2fb508c38195","keyword":"弹性畸变","originalKeyword":"弹性畸变"}],"language":"zh","publisherId":"gtyjxb201105010","title":"轴承钢中微量镁改善碳化物作用机理研究","volume":"23","year":"2011"},{"abstractinfo":"某些类型超细钛氧化物能促进针状铁素体的形成,细化晶粒钛氧化物夹杂的析出类型受钢液中的氧含量、合金元素成分的影响.以X80管线钢成分为研究对象,从热力学角度分析了微合金元素及钢液中的氧浓度对其析出类型的影响.结果显示,在钢液凝固温度区间,相同温度和氧含量时,Ti的氧化物中,Ti3O5是最稳定的,其次为Ti2O3.钢中铝对钛氧化物形成有显著影响,必须严格控制钢中的铝钛比.当温度为1873K,钢液中Ti含量为0.02%时,铝浓度要小于34μg/g.钢液中有锰存在时会影响凝固过程中析出的钛氧化物的类型.氧含量不同,氧化物的类型不同.","authors":[{"authorName":"李慧改","id":"78a0056f-69c2-409e-95cc-9bd6721150f5","originalAuthorName":"李慧改"},{"authorName":"吴春峰","id":"28b5f544-448d-418c-abaa-707e0df0f0b7","originalAuthorName":"吴春峰"},{"authorName":"赵丹","id":"264da86b-1f9b-4a24-a239-5ac77e456cf5","originalAuthorName":"赵丹"},{"authorName":"郑少波","id":"e2d02e19-5412-4e0c-97d8-f731e6fb63bd","originalAuthorName":"郑少波"},{"authorName":"翟启杰","id":"31ca871f-2146-433a-881b-2d3b7e9880f1","originalAuthorName":"翟启杰"}],"doi":"10.3969/j.issn.1001-7208.2011.02.009","fpage":"36","id":"99e6bb59-c509-49de-a18c-0754306310bf","issue":"2","journal":{"abbrevTitle":"SHJS","coverImgSrc":"journal/img/cover/SHJS.jpg","id":"59","issnPpub":"1001-7208","publisherId":"SHJS","title":"上海金属"},"keywords":[{"id":"4d88be87-01b2-4064-be2a-85437093e9ab","keyword":"凝固","originalKeyword":"凝固"},{"id":"5fd28221-e5d3-4852-8b08-f95fcddcddf8","keyword":"超细氧化物","originalKeyword":"超细氧化物"},{"id":"b7d88ecc-8e7b-4f86-b4c2-935e6e84494d","keyword":"钛氧化物","originalKeyword":"钛氧化物"},{"id":"3f421448-a0dc-42c9-92f7-0af0441213d1","keyword":"热力学","originalKeyword":"热力学"}],"language":"zh","publisherId":"shjs201102009","title":"钢凝固过程超细钛氧化物析出的热力学分析","volume":"33","year":"2011"},{"abstractinfo":"由于只需几个物性参数和设定常数,Miedema模型就能简单地计算二元合金液相或者固相的热力学数据,而且计算值与实验值吻合度较高,因而被广泛应用于二元合金热力学的计算.在介绍了该理论的物理模型的基础上详细阐述了Miedema半经验公式的推导以及物性参数和常数的确定,并对此模型的应用和误差做了客观的分析和总结.","authors":[{"authorName":"吴春峰","id":"666c8250-e330-4bf8-ae97-002f56994b93","originalAuthorName":"吴春峰"},{"authorName":"李慧改","id":"46b50121-64e6-4072-ba5a-3dce7b73ea0d","originalAuthorName":"李慧改"},{"authorName":"郑少波","id":"22348a40-2074-465f-9629-eb53ac909099","originalAuthorName":"郑少波"},{"authorName":"杨存波","id":"ce9fa56c-5363-4b2c-9739-689e8aea8232","originalAuthorName":"杨存波"}],"doi":"10.3969/j.issn.1001-7208.2011.04.001","fpage":"1","id":"ae5fa1f9-4461-47c3-ae00-557a8277bd09","issue":"4","journal":{"abbrevTitle":"SHJS","coverImgSrc":"journal/img/cover/SHJS.jpg","id":"59","issnPpub":"1001-7208","publisherId":"SHJS","title":"上海金属"},"keywords":[{"id":"046b62b3-c140-4f78-b61b-012395d74e44","keyword":"二元合金","originalKeyword":"二元合金"},{"id":"1327d40d-7d29-49f6-b6b3-84321fffefca","keyword":"Miedema模型","originalKeyword":"Miedema模型"},{"id":"bedf6d43-748d-4435-b60b-902a1aed7024","keyword":"电负性","originalKeyword":"电负性"},{"id":"e3a5f9cd-cac0-451e-818d-d30b547e2623","keyword":"电子密度","originalKeyword":"电子密度"}],"language":"zh","publisherId":"shjs201104001","title":"二元合金热力学模型-Miedema模型","volume":"33","year":"2011"},{"abstractinfo":"在分析传统非水溶液电解提取钢中夹杂物存在问题的基础上,优化了电解参数,提出了一种由γ-丁内酯等组成的低毒环保型电解液,试验证明能够完整地提取薄带中纳米级夹杂物.阐述了一套纳米级夹杂物的过滤技术.通过SEM和EDS分析检测了薄带连铸钢中纳米级夹杂物的形貌、尺寸和类型.建立了一种检测双辊薄带连铸钢中纳米级夹杂物的方法.","authors":[{"authorName":"石锋锋","id":"8e160af4-99a1-4836-885b-332ea9a71e05","originalAuthorName":"石锋锋"},{"authorName":"李慧改","id":"d50bd73e-b31f-4658-90dd-c91a7106fd39","originalAuthorName":"李慧改"},{"authorName":"吴春峰","id":"84c11040-5da6-4b7c-afcd-0ed256505805","originalAuthorName":"吴春峰"},{"authorName":"郑少波","id":"765f230c-7ab6-457b-acc9-ed6bad854e7a","originalAuthorName":"郑少波"}],"doi":"","fpage":"42","id":"af229d0b-535f-4194-b040-2c5e64796ce5","issue":"4","journal":{"abbrevTitle":"WLCS","coverImgSrc":"journal/img/cover/WLCS.jpg","id":"64","issnPpub":"1001-0777","publisherId":"WLCS","title":"物理测试"},"keywords":[{"id":"b5bb5b89-1d94-4ac4-a767-31e5726b7c90","keyword":"纳米级夹杂物","originalKeyword":"纳米级夹杂物"},{"id":"90d0d195-60ee-4491-a4a7-08d73235b105","keyword":"电解提取","originalKeyword":"电解提取"},{"id":"13f4f468-216c-4f11-964e-9ed62110115b","keyword":"物理检测","originalKeyword":"物理检测"},{"id":"4d3af92a-9b1e-4251-b5be-094a03657975","keyword":"薄带连铸","originalKeyword":"薄带连铸"}],"language":"zh","publisherId":"wlcs201004011","title":"薄带连铸钢中纳米级夹杂物的检测方法研究","volume":"28","year":"2010"},{"abstractinfo":"研究了环境气氛、动态渗氢及预渗氢对不同有序度Ni2Cr合金脆化的影响.结果表明,有序度对Ni2Cr合金在室温空气及氢气中的环境氢脆没有明显影响;动态渗氢拉伸时Ni2Cr合金存在严重的氢脆敏感性,无序和高度有序合金比部分有序合金脆化严重;预渗氢时,氢原子通过晶格扩散及晶界扩散进入合金,Ni2Cr合金氢脆敏感性随有序度的增大而减小.","authors":[{"authorName":"李慧改","id":"f379fe2f-0eff-414c-b2ab-db64b5444eb2","originalAuthorName":"李慧改"},{"authorName":"程晓英","id":"6b4c7049-9bfd-403c-95a2-7f446ca1af19","originalAuthorName":"程晓英"}],"doi":"10.3969/j.issn.1673-2812.2004.06.028","fpage":"886","id":"b091f9c2-215a-47f9-bc2f-5ccacfd0cdc7","issue":"6","journal":{"abbrevTitle":"CLKXYGCXB","coverImgSrc":"journal/img/cover/CLKXYGCXB.jpg","id":"13","issnPpub":"1673-2812","publisherId":"CLKXYGCXB","title":"材料科学与工程学报"},"keywords":[{"id":"191ad183-d9f3-4c94-b9ea-d9ec7af1e7b9","keyword":"有序度","originalKeyword":"有序度"},{"id":"ece74e81-1b2b-43bb-babc-28e4f4d251a9","keyword":"Ni2Cr","originalKeyword":"Ni2Cr"},{"id":"efbfb6cf-1669-409f-84cf-909535391fb6","keyword":"氢脆","originalKeyword":"氢脆"}],"language":"zh","publisherId":"clkxygc200406028","title":"有序度对Ni2Cr合金氢致脆断的影响","volume":"22","year":"2004"}],"totalpage":25,"totalrecord":242}