欢迎登录材料期刊网

材料期刊网

高级检索

The pyrolysis behavior of polycarbosilane (PCS) and chemical reaction mechanism during the pyrolysis process were studied by thermogravimetric-mass spectrometry (TG-MS) combined with X-ray diffraction and infrared spectroscopic analysis methods. The experimental results indicate that the main gas phase products generated during pyrolysis of PCS in nitrogen atmosphere include H2, -CH3 and CH4. The heating rate has a large effect on the pyrolysis process of PCS, the lower heating rate releases more small molecule gases and gets bigger rate of pyrolysis mass loss, demonstrating that the lower heating rate is beneifcial to fully pyrolysis of PCS and obtain ceramics products with better microstructure.

参考文献

[1] Komeya K;Matsuo;Goto YT .Preparation of Mesoporous Silicon Carbide[J].Key Engineering Materials,2007,352:95-99.
[2] Ding SQ;Zeng YP;Jiang DL .Gas permeability behavior of mullite-bonded porous silicon carbide ceramics[J].Journal of Materials Science,2007(17):7171-7175.
[3] Dey A;Kayal N;Chakrabarti O .Evaluation of Air Permeation Behavior of Porous SiC Ceramics Synthesized by Oxidation-Bonding Technique[J].INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY,2013,10:1023-1033.
[4] He JY;Ponton CB .Oxidation of SiC powders for the preparation of SiC/mullite/alumina nanocomposites[J].Journal of Materials Science,2008(12):4031-4041.
[5] Chen S;Zhang Y;Zhang C et al.A Simple Way to Prepare C/SiC Spring[J].INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY,2014,11:186-192.
[6] Jacobson NS;Kline SE .A Thermoanalytical Study of the Conversion of Amorphous Si-Ti-C-O Fibers to SiC[J].INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY,2012,9:816-822.
[7] Yamakami T;Yamaguchi T;Endo M et al.Pressureless Sintering of Carbon Nanoifbre/SiC Composites and Their Properties[J].INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY,2014,11:280-288.
[8] Yan C;Liu R;Cao Y et al.Preparation and Properties of 3D Needle-Punched C/ZrC-SiC Composites by Polymer Inifltration and Pyrolysis Process[J].CERAMICS INTERNATIONAL,2014,7:10961-10970.
[9] Yao R;Feng Z;Yu Y et al.Synthesis and Characterization of Continuous Freestanding Silicon Carbide Films with Polycarbosilane(PCS)[J].J Eur Cera Soc,2009,29:2079-2085.
[10] Li Q;Yin X;Duan W et al.Improved Dielectric and Electromagnetic Interference Shielding Properties of Ferrocene-modified Polycarbosilane Derived SiC/C Composite Ceramics[J].J Eur Cera Soc,2014,34:2187-2201.
[11] Naslain R .Preparation and Properties of Non-Oxide CMCs for Application in Engines and Nuclear Reactors:An Overview[J].Computer Science & Technology,2004,64:155-157.
[12] Xiang Y;Li W;Wang S et al.Oxidation Behavior of Oxidation Protective Coatings for PIP-C/SiC Composites at 1 500℃[J].CERAMICS INTERNATIONAL,2012,38:9-13.
[13] Dey A;Kayal N;Chakrabarti OP .Preparation of Mullite Bonded Porous SiC Ceramics by an Inifltration Technique[J].Journal of Materials Science,2011,46:5432-5438.
[14] Ma Y;Wang S;Chen ZH .Effects of High-Temperature Annealing on the Microstructures and Mechanical Properties of C(f)/SiC Composites Using Polycarbosilane[J].MATERIALS SCIENCE & ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2011,528:3069-3072.
[15] Fukushima M;Zhou Y;Yoshizawa Y .Fabrication and Microstructural Characterization of Porous SiC Membrane Supports with Al2O3-Y2O3 Additives[J].Journal of Membrane Science,2009,339:74-78.
[16] Benaissa M;Werckmann J;Ehret G et al.Structural Studies of Active Carbon used in the Growth of SiC Catalyst Support[J].Journal of Materials Science,1994,29:4700-4707.
[17] Jian K;Chen ZH;Ma QS .Effects of Pyrolysis Processes on the Microstructures and Mechanical Properties of Cf/SiC Composites Using Polycarbosilane[J].MATERIALS SCIENCE & ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2005,390:154-158.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%