Silicon infi ltrated silicon carbide (Si-SiC) ceramics, as high hardness materials, are diffi cult to machine, especially drilling micro-holes. In this study, the interaction of picosecond laser pulses (1 ps at 1 030 nm) with Si-SiC ceramics was investigated. Variations of the diameter and depth of circular holes with the growth of the laser energy density were obtained. The results indicate that the increase of machining depth follows a nonlinear relation with the increasing of laser energy density, while the diameter has little change with that. Moreover, it is found that some debris and particles are deposited around and inside the holes and waviness is in the entrance and at walls of the holes after laser processing.
参考文献
| [1] | Walter Krenkel;Bernhard Heidenreich;Ralph Renz .C/C-SiC composites for advanced friction systems[J].Advanced Engineering Materials,2002(7):427-436. |
| [2] | Lorenz Schlier;Wei Zhang;Nahum Travitzky .Macro-Cellular Silicon carbide Reactors for Nonstationary Combustion Under Piston Engine-Like Conditions[J].International journal of applied ceramic technology,2011(5):1237-1245. |
| [3] | Momma C.;Nolte S.;Vonalvensleben F.;Tunnermann A. Welling H.;Wellegehausen B.;Chichkov BN. .SHORT-PULSE LASER ABLATION OF SOLID TARGETS[J].Optics Communications: A Journal Devoted to the Rapid Publication of Short Contributions in the Field of Optics and Interaction of Light with Matter,1996(1/2):134-142. |
| [4] | Cheng, J;Perrie, W;Sharp, M;Edwardson, SP;Semaltianos, NG;Dearden, G;Watkins, KG .Single-pulse drilling study on Au, Al and Ti alloy by using a picosecond laser[J].Applied physics, A. Materials science & processing,2009(3):739-746. |
| [5] | Ancona, A;Nodop, D;Limpert, J;Nolte, S;Tunnermann, A .Microdrilling of metals with an inexpensive and compact ultra-short-pulse fiber amplified microchip laser[J].Applied physics, A. Materials science & processing,2009(1):19-24. |
| [6] | Wenqian Hu;Yung C. Shin;Galen B. King .Micromachining of Metals, Alloys, and Ceramics by Picosecond Laser Ablation[J].Journal of manufacturing science and engineering,2010(1):011009-1-011009-7. |
| [7] | Beal, VE;Paggi, RA;Salmoria, GV;Lago, A .Statistical Evaluation of Laser Energy Density Effect on Mechanical Properties of Polyamide Parts Manufactured by Selective Laser Sintering[J].Journal of Applied Polymer Science,2009(5):2910-2919. |
| [8] | J. Bonse;J. M. Wrobel;J. Kruger;W. Kautek .Ultrashort-pulse laser ablation of indium phosphide in air[J].Applied physics, A. Materials science & processing,2001(1):89-94. |
| [9] | S. Bandyopadhyay;J.K. Sarin Sundar;G. Sundararajan .Geometrical features and metallurgical characteristics of Nd:YAG laser drilled holes in thick IN718 and Ti-6AL-4V sheets[J].Journal of Materials Processing Technology,2002(1):83-95. |
| [10] | A. M. Ozkan;A. P. Malshe;T. A. Railkar;W. D. Brown;M. D. Shirk;P. A. Molian .Femtosecond laser-induced periodic structure writing on diamond crystals and microclusters[J].Applied physics letters,1999(23):3716-3718. |
| [11] | A. J. Pedraza;Y. F. Guan;J. D. Fowlkes;D. A. Smith .Nanostructures produced by ultraviolet laser irradiation of silicon. I. Rippled structures[J].Journal of Vacuum Science & Technology, B. Microelectronics and Nanometer Structures: Processing, Measurement and Phenomena,2004(6):2823-2835. |
| [12] | Wang JC;Guo CL .Ultrafast dynamics of femtosecond laser-induced periodic surface pattern formation on metals[J].Applied physics letters,2005(25):51914-1-51914-3-0. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%