An attempt was made to investigate the machinability of SiCp/Al composites based on the experimental study using mill-grinding processing method. The experiments were carried out on a high-speed CNC machining center using integrated abrasive cutting tool. The effects of combined machining parameters, e g, cutting speed (vs), feed rate (vf), and depth of cut (ap), with the same change of material removal rate (MRR) on the mill-grinding force and surface roughness (Ra) were investigated. The formation mechanism of typical machined surface defects was analyzed by SEM. The experimental results reveal that with the same change of material removal rate, lower mill-grinding force values can be gained by increasing depth of cut and feed rate simultaneously at higher cutting speed. With the same change of MRR value, lower surface roughness values can be gained by increasing the feed rate at higher cutting speed, rather than just increasing the depth of cut, or increasing the feed rate and depth of cut simultaneously. The machined surface of SiCp/Al composites reveals typical defects which can influence surface integrity.
参考文献
| [1] | Li Zhou;S. T. Huang;D. Wang;X. L. Yu .Finite element and experimental studies of the cutting process of SiCp/Al composites with PCD tools[J].The International Journal of Advanced Manufacturing Technology,2011(5/8):619-626. |
| [2] | Suraj Rawal .Metal-Matrix Composites for Space Applications[J].JOM,2001(4):14-17. |
| [3] | Y. Sahin;M. Kok;H. Celik .Tool wear and surface roughness of Al_2O_3 particle-reinforced aluminium alloy composites[J].Journal of Materials Processing Technology,2002(1/3):280-291. |
| [4] | Frank Muller;John Monaghan .Non-conventional machining of particle reinforced metal matrix composites[J].Journal of Materials Processing Technology,2001(1/3):278-285. |
| [5] | A. Riaz Ahamed;Paravasu Asokan;Sivanandam Aravindan;M. K. Prakash .Drilling of hybrid Al-5%SiC_p-5%B_4C_p metal matrix composites[J].The International Journal of Advanced Manufacturing Technology,2010(9/12):871-877. |
| [6] | Yahya Altunpak;Mustafa Ay;Serdar Asian .Drilling of a hybrid Al/SiC/Gr metal matrix composites[J].The International Journal of Advanced Manufacturing Technology,2012(5/8):513-517. |
| [7] | A. Pramanik;L. C. Zhang;J. A. Arsecularatne .Machining of metal matrix composites: Effect of ceramic particles on residual stress, surface roughness and chip formation[J].International Journal of Machine Tools & Manufacture: Design, research and application,2008(15):1613-1625. |
| [8] | Gul Tosun .Statistical analysis of process parameters in drilling of AL/SIC_P metal matrix composite[J].The International Journal of Advanced Manufacturing Technology,2011(5/8):477-485. |
| [9] | N. Muthukrishnan;M. Murugan;K. Prahlada Rao .Machinability issues in turning of Al-SiC (10p) metal matrix composites[J].The International Journal of Advanced Manufacturing Technology,2008(3/4):211-218. |
| [10] | E. Kilickap;O. Cakir;M. Aksoy .Study of tool wear and surface roughness in machining of homogenised SiC-p reinforced aluminium metal matrix composite[J].Journal of Materials Processing Technology,2005(0):862-867. |
| [11] | Ibrahim Ciftci;Mehmet Turker;Ulvi Seker .CBN cutting tool wear during machining of particulate reinforced MMCs[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2004(9/10):1041-1046. |
| [12] | Chou YK;Liu J .CVD diamond tool performance in metal matrix composite machining[J].Surface & Coatings Technology,2005(5/6):1872-1878. |
| [13] | Caroline J. E. Andrewes;Hsi-Yung Feng;W. M. Lau .Machining of an aluminum/SiC composite using diamond inserts[J].Journal of Materials Processing Technology,2000(1/3):25-29. |
| [14] | Manna A;Bhattacharayya B .Influence of machining parameters on the machinability of particulate reinforced Al/SiC-MMC[J].The International Journal of Advanced Manufacturing Technology,2005(9/10):850-856. |
| [15] | M. Seeman;G. Ganesan;R. Karthikeyan;A. Velayudham .Study on tool wear and surface roughness in machining of particulate aluminum metal matrix composite-response surface methodology approach[J].The International Journal of Advanced Manufacturing Technology,2010(5/8):613-624. |
| [16] | Rajesh Kumar Bhushan;Sudhir Kumar;S. Das .Effect of machining parameters on surface roughness and tool wear for 7075 Al alloy SiC composite[J].The International Journal of Advanced Manufacturing Technology,2010(5/8):459-469. |
| [17] | Metin Kok .Modelling the effect of surface roughness factors in the machining of 2024Al/Al_2O_3 particle composites based on orthogonal arrays[J].The International Journal of Advanced Manufacturing Technology,2011(9/12):911-920. |
| [18] | S. T. Huang;L. Zhou;X. L. Yu;Y. Cui .Experimental study of high-speed milling of SiCp/Al composites with PCD tools[J].The International Journal of Advanced Manufacturing Technology,2012(5/8):487-493. |
| [19] | N. Suresh Kumar Reddy;Shin Kwang-Sup;Minyang Yang .Experimental study of surface integrity during end milling of Al/SiC particulate metal-matrix composites[J].Journal of Materials Processing Technology,2008(1-3):574-579. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%