The influence of mineral admixtures on bending strength of mortar on the premise of equal compressive strength was investigated.Three mineral admixtures (fly ash,ground granulated blast-furnace slag and steel slag) were used.The adding amount of mineral admixture in this study ranges from 22.5% to 60%,and the water-to-binder ratio ranges from 0.34 to 0.50.With equal compressive strength,different mortars can be arranged in such a descending order with their bending strength:cement-fly ash mortar,cement mortar,cement-GGBS mortar,and cement-steel slag mortar.With the same compressive strength,the higher the steel slag content and water-to-binder ratio,the lower the bending strength of mortars.However,the effect of mineral mixture content and water-to-binder ratio on the bending strength of cement-fly ash mortar and cement-GGBS mortar is far inconspicuous.
参考文献
[1] | Pierre-Claude Aitcin .Cements of yesterday and today Concrete of tomorrow[J].Cement and Concrete Research,2000(9):1349-1359. |
[2] | N. Banthia;M. Sappakittipakorn .Toughness enhancement in steel fiber reinforced concrete through fiber hybridization[J].Cement and Concrete Research,2007(9):1366-1372. |
[3] | B.B.Sabir .Toughness and tortuosity of polypropylene fibre reinforced concrete[J].Magazine of Concrete Research,2001(3):163-170. |
[4] | Hiroshi Higashiyama;Nemkumar Banthia .Correlating Flexural and Shear Toughness of Lightweight Fiber-Reinforced Concrete[J].ACI materials journal,2008(3):251-257. |
[5] | B. W. Langan;K. Weng;M. A. Ward .Effect of silica fume and fly ash on heat of hydration of Portland cement[J].Cement and Concrete Research,2002(7):1045-1051. |
[6] | Cengiz Duran Atis .Heat evolution of high-volume fly ash concrete[J].Cement and Concrete Research,2002(5):751-756. |
[7] | Linhua Jiang;Zhenqing Liu;Yiqun Ye .Durability of concrete incorporating large volumes of low-quality fly ash[J].Cement and Concrete Research,2004(8):1467-1469. |
[8] | A Chemical Analysis Method For Determining Blast-furnace Slag Content In Hardened Concrete[J].Construction and Building Materials,2009(1):54-61. |
[9] | S.E. Chidiac;D.K. Panesar .Evolution of mechanical properties of concrete containing ground granulated blast furnace slag and effects on the scaling resistance test at 28 days[J].Cement & concrete composites,2008(2):63-71. |
[10] | G.J.Osborne .Durability of Portland blast-furnace slag cement concrete[J].Cement & concrete composites,1999(1):11-21. |
[11] | Caijun Shi .Steel Slag-Its Production, Processing, Characteristics, and Cementitious Properties[J].Journal of Materials in Civil Engineering,2004(3):230-236. |
[12] | RE. Tsakiridis;G.D. Papadimitriou;S. Tsivilis;C. Koroneos .Utilization of steel slag for Portland cement clinker production[J].Journal of hazardous materials,2008(2):805-811. |
[13] | A.Monshi;M.K.Asgarani .Producing Portland cement from iron and steel slags and limestone[J].Cement and Concrete Research,1999(9):1373-1377. |
[14] | Hydration properties of basic oxygen furnace steel slag[J].Construction and Building Materials,2010(7):p.1134. |
- 下载量()
- 访问量()
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%