The prediction model for inhibition effect of reinforced concrete was presented based on the Magge's model when the concrete surface was brushed with nitrite solution. The influence of the amount of nitrite solution on inhibiting duration was also discussed through a simulation analysis when the amount of solution were 250 g/m2, 500 g/m2, 1000 g/m2 and 1500 g/m2, respectively. The experimental results confirm that nitrite ion can diffuse well in concrete to reach an effective mol ratio from the surface of the concrete to the surface of the reinforcement, and has an effective protection for the bars against corrosion. The higher the amount of solution, the better it will accelerate getting the threshold value of mol ratio on the surface of rebar, and retarding the time for loosing the effective threshold value of mol ratio. It helps to increase the tendency of inhibiting duration and prolong the life of reinforced concrete. The nitrite solution amount is used to predict the corrosion inhibiting duration of concrete that contains chloride salt.
参考文献
| [1] | LIU Junzhe,LI Yushun,LV Lihua.Effect of Anti-freezing Admixtures on Alkali-silica Reaction in Mortars[J].武汉理工大学学报（材料科学版）英,2005(02):80-82. |
| [2] | K.Y. Ann;H.S. Jung;H.S. Kim .Effect of calcium nitrite-based corrosion inhibitor in preventing corrosion of embedded steel in concrete[J].Cement and Concrete Research,2006(3):530-535. |
| [3] | K. Y. Ann;N. R. Buenfeld .The effect of calcium nitrite on the chloride-induced corrosion of steel in concrete[J].Magazine of concrete research,2007(9):689-697. |
| [4] | Neal S. Berke;Maria C. Hicks .Predicting long-term durability of steel reinforced concrete with calcium nitrite corrosion inhibitor[J].Cement & concrete composites,2004(3):191-198. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%