W-25Cu alloys were microwave sintered in a 2 .45 GHz multimode applicator .The densification,microstructure and their dependence on sintering mode and Fe addition were investigated in detail .Owing to the volumetric heating intrinsic in microwave processing,a microstructure with larger W grain size in center regions was observed as against larger grain size in edge regions for conventional sintering .Microwave sintering demonstrates its intrinsic advantages such as rapid heating rate,densification enhancement and microstructural homogeneity;but it undesirably promotes W grain growth .Under microwave sintering,the role of Fe addition on compact consolidation is not so substantial as under conventional sintering .Moreover Fe degrades the microstructural quality,generating worse uniformity and coarser W grains .
参考文献
| [1] | E. T. Thostenson;T. -W. Chou .Microwave processing: fundamentals and applications[J].Composites, Part A. Applied science and manufacturing,1999(9):1055-1071. |
| [2] | Wai Leong Eugene Wong;Manoj Gupta .Improving Overall Mechanical Performance of Magnesium Using Nano-Alumina Reinforcement and Energy Efficient Microwave Assisted Processing Route[J].Advanced Engineering Materials,2007(10):902-909. |
| [3] | Jiping Cheng;Dinesh Agrawal;Yunjin Zhang .Microwave sintering of transparent alumina[J].Materials Letters,2002(4):587-592. |
| [4] | Chien-Yih Tsay;Kuo-Shung Liu;I.-Nan Lin .Co-firing process using conventional and microwave sintering technologies for MnZn- and NiZn-ferrites[J].Journal of the European Ceramic Society,2001(10/11):1937-1940. |
| [5] | E. Breval;J.P. Cheng;O.K. Agrawal .Comparison between microwave and conventional sintering of WC/Co composites[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2005(1/2):285-295. |
| [6] | P. MISHRA;G. SETHI;A. UPADHYAYA .Modeling of Microwave Heating of Paniculate Metals[J].Metallurgical and Materials Transactions, B. Process metallurgy and materials processing science,2006(5):839-845. |
| [7] | R.M. Anklekar;K. Bauer .Improved mechanical properties and microstructural development of microwave sintered copper and nickel steel PM parts[J].Powder Metallurgy,2005(1):39-46. |
| [8] | A. Upadhyaya;S.K. Tiwari;P. Mishra .Microwave sintering of W-Ni-Fe alloy[J].Scripta materialia,2007(1):5-8. |
| [9] | Anish Upadhyaya;Guneet Sethi .Effect of heating mode on the densification and microstructural homogenization response of premixed bronze[J].Scripta materialia,2007(6):469-472. |
| [10] | Sanjay Kumar Thakur;Tung Siew Kong;Manoj Gupta .Microwave synthesis and characterization of metastable (Al/Ti) and hybrid (Al/Ti + SiC) composites[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2007(0):61-69. |
| [11] | W.L.E. Wong;M. Gupta .Development of Mg/Cu nanocomposites using microwave assisted rapid sintering[J].Composites science and technology,2007(7/8):1541-1552. |
| [12] | O. Ozer;J.-M. Missiaen;S. Lay;R. Mitteau .Processing of tungsten/copper materials from W–CuO powder mixtures[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2007(0):525-531. |
| [13] | K. I. Rybakov;V. E. Semenov;S. V. Egorov;A. G. Eremeev;I. V. Plotnikov;Yu. V. Bykov .Microwave heating of conductive powder materials[J].Journal of Applied Physics,2006(2):023506-1-023506-9-0. |
| [14] | Wang J;Binner J;Vaidhyanathan B;Joomun N;Kilner J;Dimitrakis G;Cross TE .Evidence for the microwave effect during hybrid sintering[J].Journal of the American Ceramic Society,2006(6):1977-1984. |
| [15] | J. Ma;J. F. Diehl;E. J. Johnson;K. R. Martin;N. M. Miskovsky;C. T. Smith;G. J. Weisel;B. L. Weiss;D. T. Zimmerman .Systematic study of microwave absorption, heating, and microstructure evolution of porous copper powder metal compacts[J].Journal of Applied Physics,2007(7):074906-1-074906-8-0. |
| [16] | S.-B. LI;J.-X. XIE .Processing and microstructure of functionally graded W Cu composites fabricated by multi-billet extrusion using mechanically alloyed powders[J].Composites science and technology,2006(13):2329-2336. |
| [17] | S.S. Ryu;Y.D. Kim;I.H. Moon .Dilatometric analysis on the sintering behavior of nanocrystalline W-Cu prepared by mechanical alloying[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2002(1/2):233-240. |
| [18] | JOHN L. JOHNSON;JUSTIN J. BREZOVSKY;RAND ALL 1V1 GERMAN .Effect of Liquid Content on Distortion and Rearrangement Densification of Liquid-Phase-Sintered W-Cu[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2005(6):1557-1565. |
| [19] | F. Dore;S. Lay;N. Eustathopoulos .Segregation of Fe during the sintering of doped W-Cu Alloys[J].Scripta materialia,2003(3):237-242. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%