The influence of lightweight aggregate(LWA)pre-wetting on the chemical bound water and pore structure of the paste around aggregate as well as concrete permeability were investi-gated.The results show that,in early age the dry LWA has significant effect on the formation of dense paste around it and improving the concrete impermeability.However the prewetted LWA has strong water-releasing effect in later age,which increases the hydration degree of the paste around it, and makes the adjacent paste develop a structure with low porosity and finer aperture,furthermore the concrete impermeability can be improved.It is suggested that,as for concrete with low durability requirement,the LWA without pre-wetting treatment can be used as long as meet the workability re-quirement of fresh concrete,the good impermeability of concrete can be gained as well.As for con-crete with high durability requirement,the prewetted LWA should be used,and the pre-wetting time should be extended as long as possible,in order to optimize the concrete structure in long term,and improve the concrete durability.
参考文献
[1] | T.Y. Lo;H.Z. Cui;Z.G. Li .Influence of aggregate pre-wetting and fly ash on mechanical properties of lightweight concrete[J].Waste Management,2004(4):333-338. |
[2] | Arnon Bentur;Shin-ichi Igarashi;Konstantin Kovler .Prevention of autogenous shrinkage in high-strength concrete by internal curing using wet lightweight aggregates[J].Cement and Concrete Research,2001(11):1587-1591. |
[3] | Konstantin Kovler;Andrew Souslikov;Arnon Bentur .Pre-Soaked Lightweight Aggregates as Additives for Internal Curing of High-Strength Concretes[J].Cement, Concrete, and Aggregates,2004(2):131-138. |
[4] | Amir Elsharie;Menashi D. Cohen;Jan Olek .Influence of lightweight aggregate on the microstracture and durability of mortar[J].Cement and Concrete Research,2005(7):1368-1376. |
- 下载量()
- 访问量()
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%