欢迎登录材料期刊网

材料期刊网

中国科学院金属研究所 科学出版社
高级检索
  1. 首页
  2. 期刊
  3. 材料导报
  4. TiB2/Al复合材料的组织性能研究进展

材料导报, 2008, 22(6): 28-32.

TiB2/Al复合材料的组织性能研究进展

赵敏 1, , 姜龙涛 2, , 武高辉 3,

1.哈尔滨工业大学材料科学与工程学院,哈尔滨,150001;新疆独山子石化公司研究院,独山子,833600

2.哈尔滨工业大学材料科学与工程学院,哈尔滨,150001

3.哈尔滨工业大学材料科学与工程学院,哈尔滨,150001

关键词： TiB2 , 铝基复合材料 , 组织 , 性能

Research Progress in Microstructure and Properties of TiB2/Al Composites

TiB2/Al复合材料是一种很有潜力的复合材料,在耐磨、航空航天等领域有着广阔的应用前景.复合材料的性能除了取决于基体和增强体外,还与制备材料所用的工艺有关.综述了采用不同工艺制备的TiB2/Al复合材料的显微组织、力学性能和摩擦磨损性能,详细介绍了采用不同工艺制备出的TiB2/Al复合材料组织性能的特点,并展望了其研究趋势.

参考文献

[1] Ronald G Munro .Material properties of titanium diboride[J].J Res Natl Inst Stand Techn,2000,105(05):709.
[2] 李久荣.陶瓷-金属复合材料[M].北京:冶金工业出版社,2002:20.
[3] 朱和国,吴申庆,王恒志.XD合成Al2O3，TiB2/Al复合材料的热力学分析[J].中国有色金属学报,2001(03):382-385.
[4] Wang Y;Wang H Y;Ma B X et al.Effect of Ti/B on fabricating TiB2P/AZ91 composites by employing a TiB2P/Al master alloy[J].Journal of Alloys and Compounds,2006,422(1-2):178.
[5] Emamy M et al.Formation of TiB2 particles during dissolution of TiAl3 in Al-TiB2 metal matrix composite using an in situ technique[J].Journal of Computer Science and Technology,2006,66(7-8):1063.
[6] Tjong SC;Tam KF .Mechanical and thermal expansion behavior of hipped aluminum-TiB2 composites[J].Materials Chemistry and Physics,2006(1):91-97.
[7] Yi Hongzhan;Ma Naiheng;Li Xianfeng et al.High-temperature mechanics properties of in situ TiB2P reinforced Al-Si alloy composites[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2006,419(1-2):12.
[8] Yi Hongzhan;Ma Naiheng;Zhang Yijie et al.Effective elastic module of Al-Si composites reinforced in situ with TiB2 particles[J].Scripta Materialia,2006,54(06):1093.
[9] 周绪明,曾建民,顾红,杨云龙,吴一渝,甘武奎.LSM法制备TiB2/Al复合材料[J].机械工程材料,2006(02):25-28.
[10] 马强,张敏刚,柴跃生.原位TiB2/Al复合材料制备工艺研究[J].太原科技大学学报,2006(01):6-10.
[11] 韩延峰,疏达,王俊,孙宝德.超声制备Al-5Ti-1B中间合金中TiB2粒子尺寸分布及其晶粒细化性能[J].上海交通大学学报,2007(04):604-608.
[12] 苏雅璇,马乃恒,易宏展,王浩伟.原位合成TiB2/ZL109复合材料的力学性能[J].热加工工艺,2006(18):11-12,16.
[13] 龙祥愿,章爱生.原位反应生成纳米TiB2颗粒增强铝基复合材料的研究近况[J].热加工工艺,2006(09):73-76,85.
[14] Jonas Fjellstedt;Anders E W Jarfors .On the precipitation of TiB2 in aluminum melts from the reaction with KBF4 and K2 TiF6[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2005,413-414:527.
[15] Youssef Y M;Dashwood R J;Lee P D .Effect of clustering on particle pushing and solidification behavior in TiB2 reinforced aluminum PMMCs[J].Composites Part A:Applied Science and Manufacturing,2005,36(06):747.
[16] Youssef Y M;Dashwood R J;Lee P D .Investigation of the latent heat associated with the solidification of an Al-TiB2 composite[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2005,391(1-2):427.
[17] 赵敏,姜龙涛,武高辉,窦作勇.挤压铸造TiB2P/Al复合材料的组织与性能[J].稀有金属材料与工程,2007(03):541-545.
[18] 赵德刚,刘相法,边秀房,张永昌.TiB2/Al-CU复合材料微观组织和力学性能研究[J].铸造,2005(01):32-35.
[19] 王敏,高建军,陈寿鑫.原位生成TiB2/Al复合材料的界面微结构研究[J].铸造技术,2007(06):796-799.
[20] 张亦杰,江盛玲,马乃恒,李险峰,易宏展,王浩伟.原位自生A356/TiB2复合材料的组织与性能[J].上海交通大学学报,2007(02):328-331.
[21] 朱和国,王恒志,熊党生,袁运站,孙强金,吴申庆.XD反应合成Al3Ti,α-Al2O3和TiB2/Al复合材料的界面结构[J].中国有色金属学报,2006(04):586-591.
[22] 武高辉 .一种自润滑、高耐磨铝基复合材料及其制备方法[P].CN 03105764.0,2003-07-01.
[23] Mandal A;Maiti R;Chakraborty M et al.Effect of TiB2 particles on aging response of Al-4Cu alloy[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2004,386(1-2):296.
[24] 易宏展,马乃恒,李险峰,张亦杰,王浩伟.原位合成TiB2/ZL109复合材料的热处理特性[J].中国有色金属学报,2005(08):1184-1188.
[25] Yanfeng Han;Xiangfa Liu;Xiufang Bian .In situ TiB_2 particulate reinforced near eutectic Al-Si alloy composites[J].Composites, Part A. Applied science and manufacturing,2002(3):439-444.
[26] L. Lu;M.O. Lai;Y. Su .In situ TiB_2 reinforced Al alloy composites[J].Scripta materialia,2001(9):1017-1023.
[27] Salvador M D;Amigo V;Martinez N et al.Development of Al-Si-Mg alloys reinforced with diboride particles[J].Journal of Materials Processing Technology,2003,143-144:598.
[28] Lu L;Lim C Y H;Yeong W M .Effect of reinforcements on strength of Mg9% Al composites[J].Computers and Structures,2004,66(1-4):41.
[29] CambroneroL E G;Sanchez E;Ruiz-Roman J M et al.Mechanical characterization of AA7015 aluminum alloy reinforced with ceramics[J].Journal of Materials Processing Technology,2003,143-144:378.
[30] 姜龙涛;范瑞君;赵敏.热处理工艺对TiB2P/2024Al复合材料的力学性能的影响[J].中国有色金属学报,2005(02):129.
[31] 梁艳峰,董晟全,杨通.原位增强TiB2/Al-4.5Cu复合材料的组织与力学性能[J].铸造技术,2004(02):125-127.
[32] Tee KL.;Lu L.;Lai MO. .Improvement in mechanical properties of in-situ Al-TiB2 composite by incorporation of carbon[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):227-231.
[33] 刘莉霞,董晟全,杨通.原位增强TiB2/Al-4.5 Cu复合材料热裂倾向的研究[J].铸造设备研究,2005(06):19-22.
[34] 黄明华,王浩伟,李险峰,马乃恒.原位合成TiB2/ZL109复合材料的高温蠕变行为[J].复合材料学报,2005(01):36-40.
[35] Kumar S;Subramanya Sarma V;Murty B S .Influence of in situ formed TiB2 particles on the abrasive wear behavior of Al-4Cu alloy[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2007,465(1-2):160.
[36] Mandal A;Chakraborty M;Murty B S .Effect of TiB2 particles on sliding wear behavior of Al-4Cu alloy[J].Wear,2007,262(1-2):160.
[37] Zhao Min;Wu Gaohul;Jiang Longtao .Friction and wear properties of TiB_2p/Al composite[J].Composites, Part A. Applied science and manufacturing,2006(11):1916-1921.
[38] 赵敏,姜龙涛,武高辉,窦作勇,修发贤.AlNP/Al和TiB2P/Al复合材料摩擦磨损性能研究[J].材料工程,2004(09):57-59,64.
[39] 梁艳峰,周敬恩,董晟全,杨通.原位增强Al-4.5Cu合金的高温干摩擦磨损行为研究[J].特种铸造及有色合金,2006(08):515-517.
[40] 崔国明,曾建民,汤宏群,李会玲,杨云龙.TiB2p/Al-10Sn复合材料的制备及摩擦磨损性能研究[J].铸造技术,2006(04):337-340.
[41] 马强.原位TiB2/Al复合材料摩擦磨损性能[J].铸造设备研究,2005(03):18-19,28.
[42] Xu Jiang;Liu Wenjin .Wear characteristic of in situ synthetic TiB2 particulate-reinforced Al matrix composite formed by laser cladding[J].Wear,2006,260(4-5):486.
[43] Basu B.;Van der Biest O.;Vleugels J. .Fretting wear behavior of TiB2-based materials against bearing steel under water and oil lubrication[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2001(1):631-641.
[44] Tee K L;Lu L;Lai M O .Wear performance of in-situ Al-TiB2 composite[J].Wear,2000,240(1-2):59.
[45] Zhao Min;Wu Gaohui;Dou Zuoyong .TiB_(2p)/Al composite fabricated by squeeze casting technology[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2004(1/2):303-306.
[46] 赵敏,武高辉,窦作勇,姜龙涛.TiB2/Al自润滑复合材料在动压马达零件上的应用研究[J].功能材料,2005(z1):66-68.
[47] Yong-Jai Kwon;Makoto Kobashi;Takao Choh .Fabrication of TiB_2/Al Composites by Combustion Synthesis of Al-Ti-B System[J].Materials transactions,2002(11):2796-2801.
[48] Yanfeng Han;Xiangfa Liu;Xiufang Bian .In situ TiB_2 particulate reinforced near eutectic Al-Si alloy composites[J].Composites, Part A. Applied science and manufacturing,2002(3):439-444.
[49] Torralba J M;Da Costa C E;Velasco F .P/M Aluminum matrix composites:an overview[J].Journal of Materials Processing Technology,2003,133(1-2):203.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
作者相关
文章评分
  • 您的评分：
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%

版权所有©2010中国科学院金属研究所中国科技出版传媒股份有限公司

本系统由北京仁和汇智信息技术有限公司设计开发

技术支持：info@rhhz.net